AutoCodes – Jeep – P0204 Jeep

P0204 Jeep Code - Fuel Injector 4 Circuit Open

Quick Answer

Engine Control Module (ECM) checks the injectors circuit resistance and monitors the voltage drop during normal operation. Common causes include Faulty fuel injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector #4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0204 Jeep indicates Fuel Injector 4 Circuit Open.
Common causes
Common causes include Faulty fuel injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector #4 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 18,393
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0204 Jeep Description

Engine Control Module (ECM) checks the injectors circuit resistance and monitors the voltage drop during normal operation. The ECM will trigger the P0204 code when the resistance or voltage drop at the injector 4 is out of specifications.
OBDII Code P0204 Jeep - Fuel Injector 4 Circuit Open - AutoCodes.com
P0204 Jeep Code - Fuel Injector 4 Circuit Open

What are the Possible Causes of the DTC P0204 Jeep?

  • Faulty fuel injector 4
  • Fuel Injector 4 harness is open or shorted
  • Fuel Injector #4 circuit poor electrical connection

How to Fix the DTC P0204 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0204 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0204 Jeep code?

Need more information on how to fix the P0204 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0204 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0204 Jeep Code

1. What does the OBD-II code P0204 mean on a Jeep?

P0204 indicates that the Engine Control Module (ECM) has detected an open or malfunction in the circuit for fuel injector 4.

2. What are the common symptoms of a P0204 code on a Jeep?

Symptoms may include misfires, rough idling, reduced fuel efficiency, lack of power, and the Check Engine Light turning on.

3. What causes a P0204 code on a Jeep?

Common causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, issues with the ECM, or poor electrical connections.

4. Can I drive my Jeep with a P0204 code?

Driving with this code is not recommended as it can cause further engine damage or lead to unsafe driving conditions due to reduced performance.

5. How do I diagnose a P0204 code on my Jeep?

Start by inspecting the wiring and connectors for injector 4, check for continuity in the circuit, and test the fuel injector for proper operation using a multimeter or injector tester.

6. How do I fix a P0204 code on a Jeep?

Common fixes include repairing or replacing damaged wiring, cleaning or replacing the fuel injector, or replacing the ECM if it is determined to be the cause.

7. How much does it cost to repair a P0204 code on a Jeep?

Repair costs vary but typically range from $150 to $300 for a replacement fuel injector, plus labor. Wiring repairs may cost less, but ECM replacement can be more expensive.

8. Can a dirty fuel injector cause a P0204 code?

Yes, a clogged or dirty fuel injector can disrupt its operation and potentially trigger this code.

9. Will clearing the P0204 code fix the issue?

Clearing the code may temporarily turn off the Check Engine Light, but the underlying issue must be fixed to prevent the code from returning.

10. Can a bad ECM cause a P0204 code on a Jeep?

Yes, though less common, a malfunctioning ECM can fail to properly control the fuel injector circuit and trigger this code.

Discuss the causes and fixes for P0204 Jeep OBDII Code

Code P0204 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play