AutoCodes – Chevrolet – P0204 2018 Chevrolet Silverado

P0204 2018 Chevrolet Silverado Code - Cylinder 4 Injector Control Circuit

Quick Answer

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0204 2018 Chevrolet Silverado indicates Cylinder 4 Injector Control Circuit.
Common causes
Common causes include Faulty Fuel Injector 4, Fuel Injector 4 harness is open or shorted, Fuel Injector 4 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 451
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 23, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0204 2018 Chevrolet Silverado Description

The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. The ECM energizes each fuel injector by grounding the low control circuit of the fuel injector. The ECM monitors the status of the fuel injector circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is disabled. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the fuel injector control circuit is open for greater than 2 s.
OBDII Code P0204 2018 Chevrolet Silverado - Cylinder 4 Injector Control Circuit - AutoCodes.com
P0204 2018 Chevrolet Silverado Code - Cylinder 4 Injector Control Circuit

What are the Possible Causes of the DTC P0204 2018 Chevrolet Silverado?

  • Faulty Fuel Injector 4
  • Fuel Injector 4 harness is open or shorted
  • Fuel Injector 4 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0204 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0204 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0204 2018 Chevrolet Silverado code?

Need more information on how to fix the P0204 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0204 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0204 2018 Chevrolet Silverado Code

1. What does the OBDII code P0204 mean for a 2018 Chevrolet Silverado?

P0204 indicates a fault in the cylinder 4 injector control circuit, meaning the injector may not be receiving the correct electrical signal to function properly.

2. What are the common symptoms of code P0204 in a 2018 Chevrolet Silverado?

Symptoms include rough idling, poor engine performance, misfires, reduced fuel efficiency, and possibly the check engine light turning on.

3. What causes the P0204 code to appear?

Common causes include a faulty fuel injector, damaged wiring or connectors, a malfunctioning injector driver circuit, or issues with the powertrain control module (PCM).

4. Can you drive with a P0204 code on a 2018 Chevrolet Silverado?

Driving with this code can lead to reduced engine performance and increased fuel consumption. Prolonged driving may cause further damage to the engine or catalytic converter, so repairs should be made promptly.

5. How do I diagnose a P0204 code in my 2018 Chevrolet Silverado?

Start by inspecting the wiring and connectors for damage or corrosion. Use a multimeter to check for continuity in the injector control circuit and test the injector itself for proper operation.

6. How can the P0204 code be fixed on a 2018 Chevrolet Silverado?

Repairs may include replacing the faulty injector, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.

7. How much does it cost to fix a P0204 code on a 2018 Chevrolet Silverado?

The repair cost can vary widely depending on the issue, ranging from $50 for simple wiring repairs to over $500 for injector replacement or PCM reprogramming.

8. Is the P0204 code related to other injector codes on a 2018 Chevrolet Silverado?

Yes, similar codes like P0201, P0202, P0203, or P0205 may appear, indicating issues with injectors in other cylinders.

9. Can a dirty fuel injector cause a P0204 code?

While rare, a dirty injector could contribute to poor performance, but this code typically points to electrical issues rather than contamination.

10. Will clearing the P0204 code fix the problem on a 2018 Chevrolet Silverado?

Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for P0204 2018 Chevrolet Silverado OBDII Code

Code P0204 2018 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play