AutoCodes – Generic – P01D2

P01D2 Code - Cylinder 4 Injection Timing Advanced

Quick Answer

The Engine Control Module (ECM) has the ability to learn injector timing performance. Common causes include Fuel Type Incorrect, Fuel Contaminated/Poor Quality, Faulty Fuel Injector 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P01D2 indicates Cylinder 4 Injection Timing Advanced.
Common causes: Common causes include Fuel Type Incorrect, Fuel Contaminated/Poor Quality, Faulty Fuel Injector 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,808

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 22, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P01D2 Description

The Engine Control Module (ECM) has the ability to learn injector timing performance. When the engine is at operating temperature, throttle closed and in deceleration fuel cut-off mode, the ECM will pulse each injector individually and measure the changes in rotational speed of the crankshaft using the input from the crankshaft position sensor. The ECM will run this diagnostic at one fuel rail pressure operating point for each injector. The ECM stores the injector timing value. The Diagnostic Trouble Code (DTC) will be set when the Fuel Injection Timing is out of range.

OBDII Code P01D2 - Cylinder 4 Injection Timing Advanced - AutoCodes.com — P01D2 Code - Cylinder 4 Injection Timing Advanced

What does this mean?

What are the Possible Causes of the DTC P01D2?

Fuel Type Incorrect
Fuel Contaminated/Poor Quality
Faulty Fuel Injector 1
Fuel Injector 1 harness is open or shorted
Fuel Injector 1 circuit poor electrical connection
Engine Mechanical Problem

How to Fix the DTC P01D2?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P01D2 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P01D2 code?

Need more information on how to fix the P01D2 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P01D2 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P01D2 Chevrolet — Cylinder 4 Injection Timing Advanced
P01D2 GMC — Cylinder 4 Injection Timing Advanced

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P01D2 Code

1. What does the OBDII code P01D2 mean?

P01D2 indicates that the Engine Control Module (ECM) has detected that the fuel injection timing for cylinder 4 is more advanced than specified.

2. What are the common symptoms of the P01D2 code?

Symptoms may include rough idling, reduced engine performance, poor fuel efficiency, increased exhaust emissions, and possible engine misfires.

3. What causes the P01D2 code to appear?

Possible causes include a faulty fuel injector, issues with the injector wiring or connectors, a malfunctioning ECM, or incorrect timing due to mechanical problems like a worn timing chain or gear.

4. Can I drive my car with the P01D2 code?

It is not recommended to drive for an extended period with this code, as it can cause engine performance issues and potential long-term damage.

5. How is the P01D2 code diagnosed?

A mechanic will use an OBDII scanner to confirm the code, inspect the injector for cylinder 4, check the wiring and connectors, and potentially perform timing checks to identify the root cause.

6. How do I fix the P01D2 code?

Repairs might include replacing the cylinder 4 fuel injector, repairing or replacing damaged wiring, updating or reprogramming the ECM, or addressing mechanical timing issues.

7. What tools are needed to repair the P01D2 code?

Tools may include an OBDII scanner, a multimeter for electrical testing, and potentially specialized tools for injector or timing adjustments.

8. Can a dirty fuel injector cause the P01D2 code?

Yes, a clogged or dirty injector can disrupt proper fuel delivery and timing, leading to this code.

9. How much does it cost to repair the P01D2 code?

Repair costs can vary depending on the issue, ranging from $100â€“$300 for injector cleaning or replacement to $500 or more for timing-related repairs.

10. Will clearing the P01D2 code solve the problem?

Clearing the code will reset the ECM temporarily, but unless the underlying issue is resolved, the code is likely to return.