AutoCodes – GMC – P01CB 2014 GMC Sierra

P01CB 2014 GMC Sierra Code - Cylinder 1 Injection Timing Advanced

Quick Answer

The Engine Control Module (ECM) has the ability to learn injector timing performance. Common causes include Fuel Type Incorrect, Fuel Contaminated/Poor Quality, Faulty Fuel Injector 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P01CB 2014 GMC Sierra indicates Cylinder 1 Injection Timing Advanced.
Common causes: Common causes include Fuel Type Incorrect, Fuel Contaminated/Poor Quality, Faulty Fuel Injector 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 200

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 22, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P01CB 2014 GMC Sierra Description

The Engine Control Module (ECM) has the ability to learn injector timing performance. When the engine is at operating temperature, throttle closed and in deceleration fuel cut-off mode, the ECM will pulse each injector individually and measure the changes in rotational speed of the crankshaft using the input from the crankshaft position sensor. The ECM will run this diagnostic at one fuel rail pressure operating point for each injector. The ECM stores the injector timing value. The Diagnostic Trouble Code (DTC) will be set when the Fuel Injection Timing is out of range.

OBDII Code P01CB 2014 GMC Sierra - Cylinder 1 Injection Timing Advanced - AutoCodes.com — P01CB 2014 GMC Sierra Code - Cylinder 1 Injection Timing Advanced

What does this mean?

What are the Possible Causes of the DTC P01CB 2014 GMC Sierra?

Fuel Type Incorrect
Fuel Contaminated/Poor Quality
Faulty Fuel Injector 1
Fuel Injector 1 harness is open or shorted
Fuel Injector 1 circuit poor electrical connection
Engine Mechanical Problem

How to Fix the DTC P01CB 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P01CB 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P01CB 2014 GMC Sierra code?

Need more information on how to fix the P01CB 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P01CB 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P01CB 2014 GMC Sierra Code

1. What does the OBDII code P01CB mean on a 2014 GMC Sierra?

P01CB indicates that the engine control module (ECM) has detected that the injection timing for cylinder 1 is advanced beyond the expected range.

2. What are the common symptoms of code P01CB in a 2014 GMC Sierra?

Symptoms may include rough idling, reduced engine performance, poor fuel economy, hard starting, or an illuminated check engine light.

3. What causes the P01CB code on a GMC Sierra?

Common causes include a faulty fuel injector, issues with the injector timing solenoid, incorrect fuel pressure, wiring or connector problems, or a malfunctioning ECM.

4. Can I drive my 2014 GMC Sierra with a P01CB code?

While driving may still be possible, continuing to drive with this code can lead to engine damage, reduced performance, and increased emissions. Itâ€™s best to address the issue promptly.

5. How do I diagnose the P01CB code on my GMC Sierra?

Start by inspecting the wiring and connectors for cylinder 1â€™s fuel injector. Then, check the injector timing solenoid and fuel pressure. If these components are functioning correctly, further testing of the ECM may be required.

6. How much does it cost to fix the P01CB code on a 2014 GMC Sierra?

Repair costs can vary depending on the root cause. Replacing a faulty fuel injector can cost $150-$400, while ECM repairs or replacement may range from $500-$1,200.

7. Can the P01CB code be caused by low-quality fuel?

Yes, low-quality or contaminated fuel can cause improper injection timing, which may trigger the P01CB code.

8. How can I prevent the P01CB code from occurring?

Regular maintenance, using high-quality fuel, and ensuring timely replacement of worn components like fuel injectors can help prevent this code.

9. Will clearing the P01CB code fix the problem?

Clearing the code may turn off the check engine light temporarily, but it wonâ€™t resolve the underlying issue. The root cause must be identified and repaired to prevent the code from returning.

10. Do I need special tools to fix the P01CB code on a 2014 GMC Sierra?

Diagnosing and repairing this code may require an advanced OBDII scanner, a fuel pressure gauge, or specialized tools for testing fuel injectors and electrical components.