P0192 Dodge Code - Fuel Pressure Sensor Voltage Too Low
Quick Answer
The Engine Control Module (ECM) monitors the Fuel Pressure Sensor with the ignition ON and the battery voltage greater than 10.4. Common causes include Faulty Fuel Pressure Sensor, Fuel Pressure Sensor harness is open or shorted, Fuel Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0192 Dodge indicates Fuel Pressure Sensor Voltage Too Low.
- Common causes
- Common causes include Faulty Fuel Pressure Sensor, Fuel Pressure Sensor harness is open or shorted, Fuel Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0192 Dodge Description
What are the Possible Causes of the DTC P0192 Dodge?
- Faulty Fuel Pressure Sensor
- Fuel Pressure Sensor harness is open or shorted
- Fuel Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0192 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0192 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0192 Dodge code?
Need more information on how to fix the P0192 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0192 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0192 Dodge Code
1. What are the common symptoms of OBDII code P0192 in a Dodge related to the fuel pressure sensor voltage being too low?
- Common symptoms include poor engine performance, hard starting, stalling, decreased fuel efficiency, and possible issues with acceleration.
2. What are the typical causes of OBDII code P0192 in a Dodge indicating low voltage from the fuel pressure sensor?
- The main causes can be a faulty fuel pressure sensor, wiring issues in the sensor circuit, low fuel pressure, or a problem with the power supply to the sensor.
3. How can I diagnose the OBDII code P0192 in my Dodge to pinpoint the exact cause of the low voltage from the fuel pressure sensor?
- Use a scan tool to read the code and check the sensor's voltage readings. Inspect the sensor and its wiring for any visible damage or corrosion. Test the fuel pressure to ensure it falls within the specified range.
4. Is it safe to continue driving my Dodge with the OBDII code P0192 related to the fuel pressure sensor voltage being too low?
- It is not recommended to drive the vehicle with this code as it can lead to poor engine performance and potential fuel system issues. It is best to address the problem promptly to prevent further damage.
5. How can I repair the OBDII code P0192 in my Dodge caused by low voltage from the fuel pressure sensor?
- The repair may involve replacing the fuel pressure sensor, repairing or replacing damaged wiring, addressing low fuel pressure issues, or ensuring the sensor is receiving proper power supply.
6. Can a DIY enthusiast fix the OBDII code P0192 in a Dodge by replacing the fuel pressure sensor?
- Yes, replacing the fuel pressure sensor can be a relatively straightforward DIY task if you have the necessary tools and mechanical knowledge. However, ensure you follow proper safety precautions and consult the vehicle's service manual.
7. Are there any preventive measures to avoid encountering the OBDII code P0192 in a Dodge due to low voltage from the fuel pressure sensor?
- Regular maintenance, such as checking fuel pressure levels, inspecting sensor wiring, and monitoring engine performance, can help prevent issues that may trigger this code.
8. How much does it typically cost to repair the OBDII code P0192 in a Dodge caused by the fuel pressure sensor voltage being too low?
- The cost can vary depending on the exact cause and the labor rates in your area. Replacing the fuel pressure sensor or addressing wiring issues may cost a few hundred dollars including parts and labor.
9. Will resetting the OBDII code P0192 in a Dodge make the issue go away temporarily?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the low voltage from the fuel pressure sensor is not addressed, the code is likely to return.
10. Can a faulty fuel pressure sensor trigger multiple OBDII codes in a Dodge besides P0192?
- Yes, a faulty fuel pressure sensor can cause other related codes to trigger, such as P0190 (Fuel Rail Pressure Sensor Circuit Malfunction) or P0191 (Fuel Rail Pressure Sensor Range/Performance Problem).
Discuss the causes and fixes for P0192 Dodge OBDII Code
Code P0192 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
