AutoCodes – Chrysler – P0192 Chrysler

P0192 Chrysler Code - Fuel Pressure Sensor Voltage Too Low

Quick Answer

The Engine Control Module (ECM) monitors the Fuel Pressure Sensor with the ignition ON and the battery voltage greater than 10.4. Common causes include Faulty Fuel Pressure Sensor, Fuel Pressure Sensor harness is open or shorted, Fuel Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0192 Chrysler indicates Fuel Pressure Sensor Voltage Too Low.
Common causes: Common causes include Faulty Fuel Pressure Sensor, Fuel Pressure Sensor harness is open or shorted, Fuel Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,478

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 17, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0192 Chrysler Description

The Engine Control Module (ECM) monitors the Fuel Pressure Sensor with the ignition ON and the battery voltage greater than 10.4. The Diagnostic Trouble Code (DTC) sets when the circuit voltage to the ECM is below a calibrated threshold for a certain period of time.

OBDII Code P0192 Chrysler - Fuel Pressure Sensor Voltage Too Low - AutoCodes.com — P0192 Chrysler Code - Fuel Pressure Sensor Voltage Too Low

What does this mean?

What are the Possible Causes of the DTC P0192 Chrysler?

Faulty Fuel Pressure Sensor
Fuel Pressure Sensor harness is open or shorted
Fuel Pressure Sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0192 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0192 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0192 Chrysler code?

Need more information on how to fix the P0192 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0192 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0192 Chrysler Code

1. What are the common symptoms of OBDII code P0192 in a Chrysler vehicle?

The common symptoms of OBDII code P0192 in a Chrysler vehicle include rough idling, poor acceleration, stalling, and a decrease in fuel efficiency.

2. What causes the OBDII code P0192 in a Chrysler vehicle?

The OBDII code P0192 in a Chrysler vehicle is typically caused by a faulty fuel pressure sensor, a problem with the fuel pressure regulator, wiring issues, or a clogged fuel filter.

3. How can I diagnose the OBDII code P0192 in my Chrysler vehicle?

To diagnose the OBDII code P0192 in your Chrysler vehicle, you can use an OBDII scanner to read the code and check the fuel pressure sensor's voltage with a multimeter. Inspect the wiring for any damage or corrosion as well.

4. Can I drive my Chrysler vehicle with the OBDII code P0192?

It is not recommended to drive your Chrysler vehicle with the OBDII code P0192, as it can lead to engine performance issues and potential damage. It is best to address the issue promptly.

5. How can I repair the OBDII code P0192 in my Chrysler vehicle?

To repair the OBDII code P0192 in your Chrysler vehicle, you may need to replace the faulty fuel pressure sensor, repair any wiring issues, check and potentially replace the fuel pressure regulator, and ensure the fuel filter is clean.

6. Are there any DIY tips for fixing the OBDII code P0192 in my Chrysler vehicle?

While some DIY enthusiasts may attempt to replace the fuel pressure sensor themselves, it is recommended to consult a professional mechanic for accurate diagnosis and repair of the OBDII code P0192 in your Chrysler vehicle.

7. How much does it cost to repair the OBDII code P0192 in a Chrysler vehicle?

The cost of repairing the OBDII code P0192 in a Chrysler vehicle can vary depending on the extent of the issue, parts needed, and labor costs. It is advisable to get a few quotes from different repair shops.

8. Can a clogged fuel filter cause the OBDII code P0192 in a Chrysler vehicle?

Yes, a clogged fuel filter can cause the OBDII code P0192 in a Chrysler vehicle by restricting fuel flow and affecting the fuel pressure sensor's readings. It is essential to check and replace the fuel filter if needed.

9. Will resetting the OBDII code P0192 in my Chrysler vehicle make it go away permanently?

Resetting the OBDII code P0192 in your Chrysler vehicle may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It is crucial to diagnose and repair the root cause.

10. Is the OBDII code P0192 specific to Chrysler vehicles only?

No, the OBDII code P0192 related to Fuel Pressure Sensor Voltage Too Low can appear in vehicles from various manufacturers, not just Chrysler. The diagnostic and repair steps may vary slightly depending on the make and model of the vehicle.