Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost of diagnosing the P0192 Cadillac code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. The fuel rail pressure sensor transmits fuel pressure and temperature information via serial data to the ECM. When the fuel pressure is high, the signal voltage is high. When the fuel pressure is low, the signal voltage is low. The ECM controls the fuel pressure regulator, which regulates high-pressure fuel that goes to the fuel injector rails and the injectors. The Diagnostic Trouble Code (DTC) will be set if the Fuel Rail Pressure Sensor 1 is greater than a predefined threshold for greater than 2.6 s.
Need more information on how to fix the P0192 Cadillac code? Get Access to Factory Service Manuals
Get the P0192 Cadillac code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0192 Cadillac code? Have you replaced any parts?
Any information is appreciated. Thanks