P0192 2016 Chevrolet Silverado Code - Fuel Rail Pressure Sensor Circuit Low Input
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0192 2016 Chevrolet Silverado indicates Fuel Rail Pressure Sensor Circuit Low Input.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0192 2016 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0192 2016 Chevrolet Silverado?
- Low or no fuel
- Faulty Fuel Rail Pressure (FRP) Sensor
- Fuel Rail Pressure harness is open or shorted
- Fuel Rail Pressure circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P0192 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0192 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0192 2016 Chevrolet Silverado code?
Need more information on how to fix the P0192 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0192 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0192 2016 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P0192 in a 2016 Chevrolet Silverado?
The common symptoms include rough idling, decreased engine performance, stalling, and the illumination of the check engine light.
2. What causes the Fuel Rail Pressure Sensor Circuit Low Input code (P0192) in a 2016 Chevrolet Silverado?
The code P0192 in a 2016 Chevrolet Silverado is typically caused by a faulty fuel rail pressure sensor, issues with the fuel pump, wiring problems, or a defective powertrain control module (PCM).
3. How can I diagnose the Fuel Rail Pressure Sensor Circuit Low Input code in my 2016 Chevrolet Silverado?
To diagnose the code P0192, you can use a diagnostic scanner to read the code and investigate the fuel rail pressure sensor, wiring connections, and fuel pump for any signs of damage or malfunction.
4. Can I drive my 2016 Chevrolet Silverado with OBDII code P0192?
It is not recommended to drive your vehicle with the P0192 code as it may lead to further engine damage or potential safety hazards. It is best to address the issue promptly.
5. How do I repair OBDII code P0192 in my 2016 Chevrolet Silverado?
Repairing the P0192 code may involve replacing the fuel rail pressure sensor, repairing or replacing damaged wiring, checking the fuel pump operation, and ensuring proper connection to the PCM.
6. Will clearing the OBDII code P0192 in my 2016 Chevrolet Silverado make the issue go away?
Clearing the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing the P0192 code. It is essential to diagnose and repair the problem to prevent further complications.
7. Can a dirty fuel filter trigger the P0192 code in a 2016 Chevrolet Silverado?
A dirty fuel filter can restrict fuel flow and potentially cause low fuel pressure, which may trigger the P0192 code. It is recommended to inspect and replace the fuel filter if necessary during diagnosis.
8. How much does it typically cost to repair OBDII code P0192 in a 2016 Chevrolet Silverado?
The cost of repairing the P0192 code in a 2016 Chevrolet Silverado can vary depending on the exact cause of the issue, but it may range from $100 to $500 including parts and labor.
9. Are there any preventative maintenance steps to avoid OBDII code P0192 in a 2016 Chevrolet Silverado?
Regularly inspecting and maintaining the fuel system components, such as the fuel rail pressure sensor, fuel pump, and wiring connections, can help prevent issues that may trigger the P0192 code.
10. How long does it take to repair OBDII code P0192 in a 2016 Chevrolet Silverado?
The repair time for the P0192 code can vary based on the specific cause and complexity of the issue. It may take anywhere from 1 to 4 hours for a professional technician to diagnose and repair the problem.
Discuss the causes and fixes for P0192 2016 Chevrolet Silverado OBDII Code
Code P0192 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
