AutoCodes – Chrysler – P018E Chrysler

P018E Chrysler Code - Fuel Pressure Sensor 'B' Circuit Intermittent/Erratic

Quick Answer

The Powertrain Control Module (PCM) provides a 5-Volt supply to the Fuel Rail Pressure Sensor (FRPS). Common causes include Faulty Fuel Pressure Sensor 'B', Fuel Pressure Sensor 'B' harness is open or shorted, Fuel Pressure Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P018E Chrysler indicates Fuel Pressure Sensor 'B' Circuit Intermittent/Erratic.
Common causes: Common causes include Faulty Fuel Pressure Sensor 'B', Fuel Pressure Sensor 'B' harness is open or shorted, Fuel Pressure Sensor 'B' circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,142

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 13, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P018E Chrysler Description

The Powertrain Control Module (PCM) provides a 5-Volt supply to the Fuel Rail Pressure Sensor (FRPS). The PCM also provides a ground on the sensor return circuit. The Fuel Rail Pressure Sensor provides a signal to the PCM on the Fuel Rail Pressure Sensor Signal circuit. This sensor signal voltage changes based on the pressure in the fuel rail. The PCM will detect a low signal voltage at low rail pressures. The PCM will detect a high signal voltage during high rail pressure conditions. The PCM will light the MIL lamp immediately after the diagnostic runs and fails. During this time the customer may experience a power and or speed derate. The PCM will turn off the MIL light after the diagnostic runs and passes in four consecutive drive cycles.

OBDII Code P018E Chrysler - Fuel Pressure Sensor 'B' Circuit Intermittent/Erratic - AutoCodes.com — P018E Chrysler Code - Fuel Pressure Sensor 'B' Circuit Intermittent/Erratic

What does this mean?

What are the Possible Causes of the DTC P018E Chrysler?

Faulty Fuel Pressure Sensor 'B'
Fuel Pressure Sensor 'B' harness is open or shorted
Fuel Pressure Sensor 'B' circuit poor electrical connection

How to Fix the DTC P018E Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P018E Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P018E Chrysler code?

Need more information on how to fix the P018E Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P018E Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P018E Chrysler Code

1. What does the OBDII code P018E mean on a Chrysler?

P018E indicates an intermittent or erratic signal from the Fuel Pressure Sensor 'B' circuit, which monitors fuel pressure in the fuel system.

2. What are the common symptoms of a P018E code in a Chrysler?

Symptoms may include a check engine light, engine stalling, rough idling, hesitation during acceleration, or poor fuel economy.

3. What causes the P018E code to appear on a Chrysler?

Common causes include a faulty fuel pressure sensor, loose or damaged electrical connections, corroded wiring, or issues with the powertrain control module (PCM).

4. Can a faulty fuel pressure sensor trigger the P018E code?

Yes, a malfunctioning or failing fuel pressure sensor is a primary cause of the P018E code.

5. How do I diagnose the P018E code on my Chrysler?

Use an OBDII scanner to confirm the code, inspect the fuel pressure sensor and wiring for damage, and check the sensor's electrical connections for looseness or corrosion.

6. Is it safe to drive with a P018E code on a Chrysler?

Driving with a P018E code can lead to performance issues and potential engine damage, so it is recommended to address the issue promptly.

7. How do I fix the P018E code on my Chrysler?

Repairs may include replacing the fuel pressure sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or updating/reprogramming the PCM if necessary.

8. How much does it cost to repair a P018E code on a Chrysler?

The cost can vary but typically ranges from $150 to $400, depending on whether you need to replace the fuel pressure sensor or address wiring issues.

9. Can a dirty fuel filter cause the P018E code on a Chrysler?

While a dirty fuel filter is unlikely to directly cause the P018E code, it may contribute to fuel delivery issues that could indirectly affect the fuel pressure sensor.

10. Will clearing the P018E code solve the problem permanently?

Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.