AutoCodes
 
OBDII Code List
 
P018D DODGE

P018D DODGE - Fuel Pressure Sensor Circuit High

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Fuel Pressure Sensor
  • Fuel Pressure Sensor harness is open or shorted
  • Fuel Pressure Sensor circuit poor electrical connection

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P018d Dodge Description

The Powertrain Control Module (PCM) provides a 5-Volt supply to the Fuel Rail Pressure Sensor (FRPS). The PCM also provides a ground on the sensor return circuit. The Fuel Rail Pressure Sensor provides a signal to the PCM on the Fuel Rail Pressure Sensor Signal circuit. This sensor signal voltage changes based on the pressure in the fuel rail. The PCM will detect a low signal voltage at low rail pressures. The PCM will detect a high signal voltage during high rail pressure conditions. The PCM will light the MIL lamp immediately after the diagnostic runs and fails. During this time the customer may experience a power and or speed derate. The PCM will turn off the MIL light after the diagnostic runs and passes in four consecutive drive cycles.
OBDII Code P018d Dodge - Fuel Pressure Sensor Circuit High - AutoCodes.com

Need more help?

Get the P018d Dodge code diagnosed by a professional: Find a repair shop in your area

Related Information

P018D DODGE Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P018d Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧