P018C 2014 GMC Sierra Code - Fuel Pressure Sensor 'B' Circuit Low
Quick Answer
The Powertrain Control Module (PCM) provides a 5-Volt supply to the Fuel Rail Pressure Sensor (FRPS). Common causes include Faulty Fuel Pressure Sensor 'B', Fuel Pressure Sensor 'B' harness is open or shorted, Fuel Pressure Sensor 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P018C 2014 GMC Sierra indicates Fuel Pressure Sensor 'B' Circuit Low.
- Common causes
- Common causes include Faulty Fuel Pressure Sensor 'B', Fuel Pressure Sensor 'B' harness is open or shorted, Fuel Pressure Sensor 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P018C 2014 GMC Sierra Description
What are the Possible Causes of the DTC P018C 2014 GMC Sierra?
- Faulty Fuel Pressure Sensor 'B'
- Fuel Pressure Sensor 'B' harness is open or shorted
- Fuel Pressure Sensor 'B' circuit poor electrical connection
How to Fix the DTC P018C 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P018C 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P018C 2014 GMC Sierra code?
Need more information on how to fix the P018C 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P018C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P018C 2014 GMC Sierra Code
1. What does the OBDII code P018C mean on a 2014 GMC Sierra?
P018C indicates a "Fuel Pressure Sensor 'B' Circuit Low," meaning the fuel pressure sensor in the secondary fuel system is sending a voltage signal below the expected range to the engine control module (ECM).
2. What are the common symptoms of code P018C on a 2014 GMC Sierra?
Common symptoms include rough idling, reduced engine performance, difficulty starting, poor fuel economy, and the illumination of the check engine light.
3. What causes the P018C code on a 2014 GMC Sierra?
Possible causes include a faulty fuel pressure sensor, damaged or corroded wiring/connectors, a malfunctioning ECM, or a problem with the fuel pump or fuel system components.
4. How can I diagnose the P018C code on my 2014 GMC Sierra?
Start by checking the wiring and connectors for damage or corrosion. Use a multimeter to test the fuel pressure sensor's voltage output and inspect the fuel system for potential leaks or blockages.
5. Can I drive my 2014 GMC Sierra with the P018C code active?
Driving with this code is not recommended, as it may lead to poor engine performance, reduced fuel efficiency, and potentially cause further damage to the fuel system or engine.
6. How do I fix the P018C code on a 2014 GMC Sierra?
Repairs may include replacing the fuel pressure sensor, repairing or replacing damaged wiring/connectors, or addressing fuel system issues such as a faulty fuel pump.
7. How much does it cost to repair the P018C code on a 2014 GMC Sierra?
Repair costs vary but typically range from $150 to $400, depending on whether the issue is with the fuel pressure sensor, wiring, or other fuel system components.
8. Can a dirty fuel filter cause the P018C code on a 2014 GMC Sierra?
While unlikely, a severely clogged fuel filter could restrict fuel flow and contribute to low fuel pressure, which might trigger the code. It’s worth inspecting the fuel filter during diagnosis.
9. How do I prevent the P018C code from recurring on my 2014 GMC Sierra?
Regular maintenance, such as inspecting fuel system components, replacing the fuel filter as needed, and addressing wiring issues promptly, can help prevent this code.
10. Does the P018C code require reprogramming the ECM on a 2014 GMC Sierra?
Reprogramming the ECM is rarely necessary for this code. It’s typically resolved by repairing or replacing the faulty fuel pressure sensor or addressing wiring issues.
Discuss the causes and fixes for P018C 2014 GMC Sierra OBDII Code
Code P018C 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
