P0183 Land Rover Code - Fuel Temperature Sensor Circuit High Input
Quick Answer
The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. Common causes include Faulty Fuel Temperature Sensor, Fuel Temperature Sensor harness is open or shorted, Fuel Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0183 Land Rover indicates Fuel Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Faulty Fuel Temperature Sensor, Fuel Temperature Sensor harness is open or shorted, Fuel Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0183 Land Rover Description
What are the Possible Causes of the DTC P0183 Land Rover?
- Faulty Fuel Temperature Sensor
- Fuel Temperature Sensor harness is open or shorted
- Fuel Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0183 Land Rover?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0183 Land Rover code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0183 Land Rover code?
Need more information on how to fix the P0183 Land Rover code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0183 Land Rover code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0183 Land Rover Code
1. What does the OBDII code P0183 mean on a Land Rover?
P0183 indicates that the fuel temperature sensor circuit is reporting a high input, typically due to an electrical issue or a sensor malfunction.
2. What are the symptoms of a P0183 code in a Land Rover?
Common symptoms include hard starting, poor fuel efficiency, rough idling, or the check engine light being illuminated.
3. What causes the P0183 code to be triggered?
Possible causes include a faulty fuel temperature sensor, damaged wiring or connectors, or a short circuit in the sensor's circuit.
4. Can I continue driving my Land Rover with a P0183 code?
While the vehicle may still be drivable, ignoring the code can lead to poor performance or additional damage to the fuel system.
5. How can I fix the P0183 code on my Land Rover?
Start by inspecting the fuel temperature sensor, wiring, and connectors for damage or corrosion. Replace the sensor if it's faulty, and repair any damaged wiring.
6. Where is the fuel temperature sensor located on a Land Rover?
The fuel temperature sensor is typically located on or near the fuel rail or within the fuel injection system.
7. How much does it cost to fix a P0183 code?
Repair costs can vary but generally include the price of a new fuel temperature sensor (around $50-$150) and labor costs if professional repair is needed.
8. Can a P0183 code cause long-term damage to my Land Rover?
If left unaddressed, the code can lead to inefficient fuel combustion and potential wear on engine components.
9. How do I diagnose the P0183 code on my Land Rover?
Use an OBDII scanner to confirm the code, then visually inspect the sensor and wiring. Testing the sensor's resistance with a multimeter can help verify if it’s faulty.
10. Will clearing the P0183 code fix the issue?
Clearing the code will remove it temporarily, but it will return if the underlying issue is not resolved.
Discuss the causes and fixes for P0183 Land Rover OBDII Code
-
-
Did you ever locate the fuel temp sensor in your LR2 ? I have a 2008 and have the same issue.
-
The fuel temperature sensor on a 2008 Land Rover LR2 is typically integrated into the fuel rail pressure sensor, which is mounted on the fuel rail in the engine bay. This is common in modern vehicles, where a single sensor monitors both fuel pressure and temperature.
Location:
- The fuel rail is located near the top of the engine, close to the injectors.
- The fuel rail pressure sensor with the integrated fuel temperature sensor is attached to this rail.
- Look for a small sensor with an electrical connector plugged into it.
Additional Tips:
- If you're troubleshooting a fuel temperature sensor issue, ensure the wiring and connector are intact and free from corrosion.
- For precise details, refer to the Land Rover service manual for the 2008 LR2 or consult a professional mechanic, as accessing the sensor might require some disassembly.
Click here to enlarge image
-
-
The fuel temperature sensor on a 2011 Land Rover LR2 is typically integrated into the fuel rail pressure sensor or located within the fuel rail assembly. This sensor monitors the temperature of the fuel to ensure proper fuel injection and engine performance.
Common Locations:
- Fuel Rail Assembly: Attached to the fuel rail where it monitors the fuel temperature directly in the rail.
- Fuel Filter Housing (less common): In some models, the sensor may be part of the fuel filter assembly.
How to Identify:
- Look for a small electrical connector attached to the sensor, which may have a couple of wires leading to it.
- It's often near the fuel injectors or along the high-pressure fuel system components.
If you're having trouble locating it, refer to the service manual for your specific model or consult a professional, as accessing the sensor may require removing other components.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
