AutoCodes – GMC – P0175 2014 GMC Sierra

P0175 2014 GMC Sierra Code - Fuel Trim System Rich Bank 2

Quick Answer

The Engine Control Module (ECM) controls a Closed Loop air/fuel metering system to provide the best possible combination of drivability, fuel economy, and emission control. Common causes include Dirty or Faulty Mass Air Flow (MAF) Sensor, Intake Air Leaks, Exhaust Gas Leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0175 2014 GMC Sierra indicates Fuel Trim System Rich Bank 2.
Common causes: Common causes include Dirty or Faulty Mass Air Flow (MAF) Sensor, Intake Air Leaks, Exhaust Gas Leaks.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 453

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 29, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0175 2014 GMC Sierra Description

The Engine Control Module (ECM) controls a Closed Loop air/fuel metering system to provide the best possible combination of drivability, fuel economy, and emission control. The ECM monitors the Heated Oxygen Sensor (HO2S) signal voltage and adjusts the fuel delivery based on the signal voltage while in Closed Loop. A change made to the fuel delivery changes the long and short-term fuel trim values. The short-term fuel trim values change rapidly in response to the HO2S signal voltages. These changes fine-tune the engine fueling. The long-term fuel trim values change in response to trends in the short-term fuel trim. The long-term fuel trim makes coarse adjustments to fueling to re-center and restore control to short-term fuel trim. The ideal fuel trim values are around 0 %. A positive fuel trim value indicates that the ECM is adding fuel to compensate for a lean condition. A negative fuel trim value indicates that the ECM is reducing the amount of fuel to compensate for a rich condition. The Diagnostic Trouble Code (DTC) will be set when the average long-term fuel trim weighted average value is greater or less than a calibrated value.

OBDII Code P0175 2014 GMC Sierra - Fuel Trim System Rich Bank 2 - AutoCodes.com — P0175 2014 GMC Sierra Code - Fuel Trim System Rich Bank 2

What does this mean?

What are the Possible Causes of the DTC P0175 2014 GMC Sierra?

Dirty or Faulty Mass Air Flow (MAF) Sensor
Intake Air Leaks
Exhaust Gas Leaks
Fuel Contamination
Faulty or Leaking Fuel Injectors
Faulty Front Heated Oxygen Sensor
Ignition Misfiring
Incorrect Fuel Pressure
Positive Crankcase Ventilation (PCV) Hose Leaks

How to Fix the DTC P0175 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The P0175 code means that more gasoline is detected in the exhaust gases exiting the combustion chamber. If the P0175 is set in along with the P0172 code, it is highly likely that the problem is caused by leaking fuel injectors. If there are no leaking fuel injectors, the next step is to replace the air filter and clean the Mass Air Flow (MAF) Sensor. If the problem persists the MAF or Front Heated Oxygen (O2) Sensor will need to be replaced.

Click Here to Learn What is Bank 1 and Bank 2

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0175 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0175 2014 GMC Sierra code?

Need more information on how to fix the P0175 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0175 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0175 2014 GMC Sierra Code

What does the OBDII code P0175 mean on a 2014 GMC Sierra?

P0175 indicates that the fuel system in Bank 2 is running too rich, meaning there’s too much fuel relative to air in the combustion process.

What are the common symptoms of code P0175 on a 2014 GMC Sierra?

Symptoms may include poor fuel economy, black smoke from the exhaust, rough idling, reduced engine performance, and the Check Engine Light turning on.

What causes the P0175 code on a 2014 GMC Sierra?

Common causes include a dirty or faulty mass airflow sensor (MAF), a leaking fuel injector, a clogged air filter, or a malfunctioning fuel pressure regulator.

Can a bad oxygen sensor trigger the P0175 code?

Yes, a faulty downstream or upstream oxygen sensor can provide incorrect readings, causing the engine to run rich and trigger the P0175 code.

Is it safe to drive a 2014 GMC Sierra with code P0175?

While it may be drivable, prolonged driving with this code can lead to engine damage, reduced performance, and excessive fuel consumption.

How can I diagnose the P0175 code on my GMC Sierra?

Start by checking the air filter, MAF sensor, and fuel injectors for issues. Use a scan tool to monitor fuel trim values and oxygen sensor readings for abnormalities.

What repairs can fix the P0175 code on a 2014 GMC Sierra?

Repairs may include cleaning or replacing the MAF sensor, replacing the air filter, fixing leaking fuel injectors, or replacing a faulty oxygen sensor.

Can a vacuum leak cause the P0175 code?

Vacuum leaks typically cause a lean condition, not a rich condition. However, other air intake issues may contribute to the P0175 code.

Will resetting the Check Engine Light fix the P0175 code?

Resetting the light may temporarily clear the code, but the underlying issue causing the rich condition must be addressed to prevent the code from returning.

How much does it cost to fix the P0175 code on a 2014 GMC Sierra?

Repair costs vary depending on the cause but can range from $100 for a sensor replacement to $500 or more for fuel system repairs.