AutoCodes - Nissan - P0174 2002 NISSAN ALTIMA SEDAN

P0174 2002 NISSAN ALTIMA SEDAN Code - Fuel Injection System Too Lean Bank 2

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|P0174 2002 NISSAN ALTIMA SEDAN code possible causes

  • Intake air leaks
  • Faulty front heated oxygen sensor
  • Ignition misfiring
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Incorrect fuel pressure
  • Lack of fuel
  • Faulty Mass Air Flow (MAF) sensor
  • Incorrect Positive Crankcase Ventilation (PCV) hose connection

|How do I fix the P0174 2002 NISSAN ALTIMA SEDAN code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0174 2002 NISSAN ALTIMA SEDAN code tech notes

If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.

|Cost of diagnosing the P0174 2002 NISSAN ALTIMA SEDAN code

Labor: 1.0

The cost of diagnosing the P0174 2002 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0174 2002 NISSAN ALTIMA SEDAN code detected?

- Fuel injection system does not operate properly.
- The amount of mixture ratio compensation is too small. (The mixture ratio is too lean.)

|What are P0174 2002 NISSAN ALTIMA SEDAN code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Excessive Fuel Consumption

|P0174 2002 NISSAN ALTIMA SEDAN code description

With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. The Engine Control Module (ECM) calculates the necessary compensation to correct the offset between the actual and the theoretical ratios.
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
OBDII Code P0174 2002 Nissan Altima Sedan - Fuel Injection System Too Lean Bank 2 - AutoCodes.com

|Need more information with the P0174 2002 NISSAN ALTIMA SEDAN code?

Need more information on how to fix the P0174 2002 NISSAN ALTIMA SEDAN code? Get Access to Factory Service Manuals

|Need help with a P0174 2002 NISSAN ALTIMA SEDAN code?

Get the P0174 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

|P0174 2002 NISSAN ALTIMA SEDAN code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0174 2002 Nissan Altima Sedan code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?