P0171 2010 Nissan Altima_sedan Code - Fuel Injection System Too Lean Bank 1
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0171 2010 Nissan Altima_sedan indicates Fuel Injection System Too Lean Bank 1.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0171 2010 Nissan Altima_sedan Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
What are the Possible Causes of the DTC P0171 2010 Nissan Altima_sedan?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P0171 2010 Nissan Altima_sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0171 2010 Nissan Altima_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0171 2010 Nissan Altima_sedan code?
Need more information on how to fix the P0171 2010 Nissan Altima_sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0171 2010 Nissan Altima_sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0171 2010 Nissan Altima_sedan Code
1. What are the common symptoms of OBDII code P0171 on a 2010 Nissan Altima Sedan?
Symptoms include rough idling, poor acceleration, engine misfires, decreased fuel efficiency, and potentially a Check Engine light.
2. What does the OBDII code P0171 "Fuel Injection System Too Lean Bank 1" indicate in a 2010 Nissan Altima Sedan?
This code indicates that the engine is running too lean, meaning there is too much air and not enough fuel in the fuel-air mixture.
3. What are the possible causes of OBDII code P0171 on a 2010 Nissan Altima Sedan?
Common causes include a vacuum leak, faulty oxygen sensor, clogged fuel filter, dirty mass airflow sensor, or issues with the fuel injectors.
4. How can I diagnose the OBDII code P0171 on my 2010 Nissan Altima Sedan?
Diagnosis involves checking for vacuum leaks, testing the oxygen sensor, inspecting the mass airflow sensor, and ensuring the fuel injectors are functioning properly.
5. Can a dirty air filter cause OBDII code P0171 on a 2010 Nissan Altima Sedan?
Yes, a dirty air filter can restrict airflow, leading to a lean fuel mixture and triggering the P0171 trouble code.
6. How should I repair OBDII code P0171 on my 2010 Nissan Altima Sedan?
Repair options include fixing any vacuum leaks, replacing the oxygen sensor, cleaning or replacing the mass airflow sensor, checking the fuel filter, and cleaning or replacing the fuel injectors.
7. Is it safe to continue driving with OBDII code P0171 on a 2010 Nissan Altima Sedan?
It is generally not recommended to drive with a lean fuel mixture as it can lead to engine damage over time. It's best to address the issue promptly.
8. Can a faulty fuel pump cause OBDII code P0171 on a 2010 Nissan Altima Sedan?
While a faulty fuel pump can contribute to a lean condition, it is not a common cause of the P0171 code. Focus on checking other components first.
9. Will resetting the OBDII code P0171 on a 2010 Nissan Altima Sedan make it go away permanently?
Simply resetting the code without addressing the underlying issue will not fix the problem permanently. The root cause must be identified and repaired.
10. How can I prevent OBDII code P0171 from coming back on my 2010 Nissan Altima Sedan?
Regular maintenance, such as changing the air filter, fuel filter, and ensuring proper engine component function, can help prevent the recurrence of the P0171 trouble code.
Discuss the causes and fixes for P0171 2010 Nissan Altima_sedan OBDII Code
Code P0171 2010 Nissan Altima_sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
