AutoCodesBuick – P0168 Buick

P0168 Buick Code - Engine Fuel Temperature Too High

Quick Answer

The Fuel Temperature Sensor is a thermistor type sensor. Common causes include Fuel contamination, Faulty Fuel Tank Temperature Sensor, Fuel Tank Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0168 Buick indicates Engine Fuel Temperature Too High.
Common causes
Common causes include Fuel contamination, Faulty Fuel Tank Temperature Sensor, Fuel Tank Temperature Sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 778
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 15, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0168 Buick Description

The Fuel Temperature Sensor is a thermistor type sensor. The Powertrain Control Module (PCM) supplies 5 volts and a ground circuit to the sensor. When the PCM detects a Fuel Temperature Sensor above a pre-determined value, no Malfunction Indicator Lamp (MIL) sets. A fuel cooler located in front of the fuel tank is used to help keep the fuel temperature at an acceptable limit.
OBDII Code P0168 Buick - Engine Fuel Temperature Too High - AutoCodes.com
P0168 Buick Code - Engine Fuel Temperature Too High

What are the Possible Causes of the DTC P0168 Buick?

  • Fuel contamination
  • Faulty Fuel Tank Temperature Sensor
  • Fuel Tank Temperature Sensor harness is open or shorted
  • Fuel Tank Temperature Sensor circuit poor electrical connection

How to Fix the DTC P0168 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0168 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0168 Buick code?

Need more information on how to fix the P0168 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0168 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0168 Buick Code

1. What does the OBDII code P0168 mean on a Buick?

P0168 indicates that the engine control module (ECM) has detected fuel temperature readings that are too high, which may impact engine performance.

2. What are the common symptoms of a P0168 code in a Buick?

Symptoms may include poor engine performance, reduced fuel efficiency, difficulty starting, or the check engine light turning on.

3. What causes the P0168 code to appear in a Buick?

Common causes include a faulty fuel temperature sensor, prolonged exposure of the fuel system to high heat, contaminated fuel, or issues with the fuel pump or fuel lines.

4. Can I drive my Buick with the P0168 code active?

While the vehicle may still run, driving with this code can cause further damage to the engine or fuel system. It’s best to address the issue promptly.

5. How do I fix the P0168 code on my Buick?

Repairs may involve replacing the fuel temperature sensor, inspecting and repairing fuel lines, flushing contaminated fuel, or addressing overheating issues.

6. Where is the fuel temperature sensor located on a Buick?

The fuel temperature sensor is typically located near the fuel rail or within the fuel tank as part of the fuel pump assembly, depending on the model.

7. How much does it cost to repair a P0168 code on a Buick?

Repair costs can vary widely, with fuel temperature sensor replacement often costing between $100 and $300, depending on parts and labor.

8. Can a dirty fuel filter cause the P0168 code on a Buick?

A clogged fuel filter can contribute to higher fuel temperatures by overworking the fuel pump, potentially triggering the P0168 code.

9. How can I prevent the P0168 code from appearing again in my Buick?

Regular maintenance, using quality fuel, and ensuring proper cooling system function can help prevent excessively high fuel temperatures.

10. Will resetting the check engine light fix the P0168 code on my Buick?

Resetting the light may clear the code temporarily, but the underlying issue must be addressed to prevent the code from returning.

Discuss the causes and fixes for P0168 Buick OBDII Code

Code P0168 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play