P0160 Chrysler Code - O2 Sensor Stays At Center Bank 2 Sensor 2
Quick Answer
2/2 (Bank 2 Sensor 2) Heated Oxygen Sensor (HO2S) voltage is monitored with the engine running for more than 2 minutes and engine coolant temperature is more than 170°F (76.7°C). Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0160 Chrysler indicates O2 Sensor Stays At Center Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0160 Chrysler Description
What are the Possible Causes of the DTC P0160 Chrysler?
- Faulty Rear Heated Oxygen Sensor Bank 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0160 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0160 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0160 Chrysler code?
Need more information on how to fix the P0160 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0160 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0160 Chrysler Code
1. What does the OBDII code P0160 mean on a Chrysler?
P0160 indicates that the O2 sensor for Bank 2 Sensor 2 is not showing any activity or voltage changes, meaning it is stuck at a middle (center) reading.
2. What are the common symptoms of code P0160 on a Chrysler?
Common symptoms include an illuminated check engine light, poor fuel efficiency, increased emissions, or no noticeable symptoms at all.
3. What causes the P0160 code to appear?
Possible causes include a faulty O2 sensor, damaged wiring or connectors, an exhaust leak, or a problem with the vehicle’s powertrain control module (PCM).
4. How do I diagnose the P0160 code on my Chrysler?
Start by inspecting the O2 sensor wiring and connectors for damage or corrosion, check for exhaust leaks, and use a scan tool to monitor the sensor’s voltage output.
5. Can I drive my Chrysler with the P0160 code active?
While the vehicle may still be drivable, ignoring the code can lead to reduced fuel efficiency, increased emissions, and potential damage to the catalytic converter.
6. How do I fix the P0160 code on a Chrysler?
Repairs may include replacing the O2 sensor, fixing damaged wiring or connectors, addressing exhaust leaks, or reprogramming the PCM if necessary.
7. What is Bank 2 Sensor 2 on a Chrysler?
Bank 2 refers to the side of the engine opposite Bank 1, and Sensor 2 is the downstream O2 sensor located after the catalytic converter.
8. How much does it cost to fix the P0160 code on a Chrysler?
Replacing an O2 sensor typically costs $150–$300, including parts and labor, though costs may vary based on the specific model and repair needs.
9. Can a bad catalytic converter cause the P0160 code?
Yes, a failing catalytic converter can affect the downstream O2 sensor's readings and potentially trigger the P0160 code.
10. Will clearing the P0160 code solve the problem?
Clearing the code will turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P0160 Chrysler OBDII Code
Code P0160 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
