AutoCodes – Mercury – P015D Mercury

P015D Mercury Code - Oxygen Sensor Delayed Response Lean to Rich Bank 2 Sensor 1

Quick Answer

During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. Common causes include Faulty Heated Oxygen Bank 2 Sensor 1, Heated Oxygen Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P015D Mercury indicates Oxygen Sensor Delayed Response Lean to Rich Bank 2 Sensor 1.
Common causes: Common causes include Faulty Heated Oxygen Bank 2 Sensor 1, Heated Oxygen Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Bank 2 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,206

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 12, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P015D Mercury Description

During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. The PCM expects the signal to exceed a calibrated rich or lean value within a calibrated amount of time. If the signal voltage remains less than the rich value after a number of occurrences, the PCM intrusively controls the fuel system rich over increasing time periods in an attempt to force the signal to greater than the calibrated rich value. The test fails when, after three consecutive intrusive attempts, the signal cannot be forced greater than the calibrated rich value. Also, if the signal voltage remains greater than the lean value after a calibrated amount of time with the fuel injectors off, a counter is incremented. The test fails when after three consecutive occurrences the signal is not less than the calibrated lean value.

OBDII Code P015D Mercury - Oxygen Sensor Delayed Response Lean to Rich Bank 2 Sensor 1 - AutoCodes.com — P015D Mercury Code - Oxygen Sensor Delayed Response Lean to Rich Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P015D Mercury?

Faulty Heated Oxygen Bank 2 Sensor 1
Heated Oxygen Bank 2 Sensor 1 harness is open or shorted
Heated Oxygen Bank 2 Sensor 1 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

How to Fix the DTC P015D Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P015D Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P015D Mercury code?

Need more information on how to fix the P015D Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P015D Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P015D Mercury Code

1. What are the common symptoms of OBDII code P015D in a Mercury?

- Common symptoms include poor fuel economy, rough idling, lack of power, and the illumination of the Check Engine Light.

2. What does the OBDII code P015D Mercury indicate?

- This code indicates a delayed response from the oxygen sensor located in Bank 2 Sensor 1, signaling a lean to rich condition.

3. What are the possible causes of the P015D code in a Mercury?

- Potential causes include a faulty oxygen sensor, wiring issues, vacuum leaks, exhaust system leaks, or problems with the engine's air-fuel ratio.

4. How can I diagnose the P015D code in my Mercury?

- Diagnosis involves using an OBDII scanner to retrieve the code, checking the oxygen sensor's response time, inspecting the sensor's wiring, and performing a visual inspection of the exhaust system.

5. How serious is the P015D code in a Mercury?

- While the vehicle may still be driveable with this code, it can lead to decreased fuel efficiency and potential damage to the catalytic converter if left unresolved for an extended period.

6. Can I continue driving my Mercury with the P015D code?

- It is not recommended to drive the vehicle for an extended period with this code present, as it can lead to poor engine performance and increased emissions.

7. How can I repair the P015D code in my Mercury?

- Repair may involve replacing the Bank 2 Sensor 1 oxygen sensor, repairing any wiring issues, fixing vacuum or exhaust leaks, or addressing problems with the air-fuel mixture.

8. Will resetting the Check Engine Light resolve the P015D code?

- Resetting the Check Engine Light may temporarily clear the code, but it will likely return if the underlying issue causing the delayed oxygen sensor response is not addressed.

9. How much does it cost to fix the P015D code in a Mercury?

- The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $500 or more, including parts and labor.

10. Can I replace the oxygen sensor in my Mercury myself to fix the P015D code?

- While replacing the oxygen sensor is a relatively straightforward task, it is recommended to have a professional mechanic diagnose the issue first to ensure the sensor is the root cause of the problem.