AutoCodes – GMC – P015C 2014 GMC Sierra

P015C 2014 GMC Sierra Code - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 1

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P015C 2014 GMC Sierra indicates Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 1.
Common causes: Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1, Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 222

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 29, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P015C 2014 GMC Sierra Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the HO2S 1 rich-to-lean or lean-to-rich average response time is greater than a calibrated value for greater than 60s.

OBDII Code P015C 2014 GMC Sierra - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 1 - AutoCodes.com — P015C 2014 GMC Sierra Code - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P015C 2014 GMC Sierra?

Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
Heated Oxygen Sensor Bank 2 Sensor 1 harness is open or shorted
Heated Oxygen Sensor Bank 2 Sensor 1 circuit poor electrical connection
Low or high fuel system pressure
Fuel contamination
Faulty fuel injectors
Exhaust gas leaks
Engine vacuum leaks

How to Fix the DTC P015C 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Front Heated Oxygen Sensors (HO2S) usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P015C 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P015C 2014 GMC Sierra code?

Need more information on how to fix the P015C 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P015C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P015C 2014 GMC Sierra Code

What does the OBDII code P015C mean for a 2014 GMC Sierra?

P015C indicates "Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 1," meaning the upstream oxygen sensor on Bank 2 is not switching as quickly as expected between rich and lean conditions.

What are the common symptoms of code P015C in a 2014 GMC Sierra?

Symptoms may include a check engine light, reduced fuel efficiency, rough idling, or poor engine performance.

What causes the P015C code to appear?

Common causes include a failing oxygen sensor (Bank 2 Sensor 1), exhaust leaks, wiring issues, or a problem with the air-fuel mixture.

How do you diagnose the P015C code on a 2014 GMC Sierra?

Diagnosis involves scanning the vehicle for codes, visually inspecting the oxygen sensor and wiring, checking for exhaust leaks, and monitoring live O2 sensor data with a scan tool.

Can I drive my 2014 GMC Sierra with the P015C code?

While it may be possible to drive, it's not recommended because prolonged issues can lead to decreased fuel efficiency and potential damage to other engine components.

How do you fix the P015C code on a 2014 GMC Sierra?

Repairs often include replacing the Bank 2 Sensor 1 oxygen sensor, repairing damaged wiring, fixing exhaust leaks, or addressing air-fuel mixture issues.

How much does it cost to fix the P015C code?

Replacing an oxygen sensor typically costs $150-$300, including parts and labor, though exact costs depend on your location and repair shop.

Can a dirty air filter cause the P015C code?

While unlikely, a severely dirty air filter might contribute to air-fuel imbalance, which could indirectly impact sensor performance.

What tools are needed to fix the P015C code?

Common tools include a scan tool, multimeter, oxygen sensor socket, and basic hand tools for inspecting and replacing components.

Is replacing the oxygen sensor the only solution for the P015C code?

Not necessarilyâ€”while the oxygen sensor is often the issue, you should also check for exhaust leaks, wiring problems, and air-fuel mixture concerns before replacing it.