AutoCodes – Infiniti – P015B Infiniti

P015B Infiniti Code - Air Fuel Ratio Delayed Response - Lean To Rich Bank 1 Sensor 1

Quick Answer

The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. Common causes include Faulty Air Fuel Ratio (A/F) Bank 1 Sensor 1, Air Fuel Ratio (A/F) Bank 1 Sensor 1 harness is open or shorted, Air Fuel Ratio (A/F) Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P015B Infiniti indicates Air Fuel Ratio Delayed Response - Lean To Rich Bank 1 Sensor 1.
Common causes: Common causes include Faulty Air Fuel Ratio (A/F) Bank 1 Sensor 1, Air Fuel Ratio (A/F) Bank 1 Sensor 1 harness is open or shorted, Air Fuel Ratio (A/F) Bank 1 Sensor 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,248

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 13, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P015B Infiniti Description

The air fuel ratio (A/F) sensor 1 is a planar one-cell limit current sensor. The sensor element of the A/F sensor 1 is composed an electrode layer, which transports ions. It has a heater in the element. The sensor is capable of precise measurement λ = 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range. The exhaust gas components diffuse through the diffusion layer at the sensor cell. An electrode layer is applied voltage, and this current relative oxygen density in lean. Also this current relative hydrocarbon density in rich.
Therefore, the A/F sensor 1 is able to indicate air fuel ratio by this electrode layer of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of approximately 760°C (1,400°F).

OBDII Code P015B Infiniti - Air Fuel Ratio Delayed Response - Lean To Rich Bank 1 Sensor 1 - AutoCodes.com — P015B Infiniti Code - Air Fuel Ratio Delayed Response - Lean To Rich Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P015B Infiniti?

Faulty Air Fuel Ratio (A/F) Bank 1 Sensor 1
Air Fuel Ratio (A/F) Bank 1 Sensor 1 harness is open or shorted
Air Fuel Ratio (A/F) Bank 1 Sensor 1 circuit poor electrical connection

How to Fix the DTC P015B Infiniti?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Air Fuel Ratio Bank 1 Sensor 1 usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P015B Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P015B Infiniti code?

Need more information on how to fix the P015B Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P015B Infiniti code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P015B Infiniti Code

1. What are the common symptoms of OBDII code P015B in an Infiniti?

Symptoms may include decreased fuel efficiency, rough idle, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P015B in an Infiniti indicate?

The code indicates that there is a delayed response in the air-fuel ratio sensor located in Bank 1 Sensor 1, where the sensor is taking too long to switch from a lean to a rich fuel mixture.

3. What are the possible causes of OBDII code P015B in an Infiniti?

Possible causes include a faulty air-fuel ratio sensor, wiring issues, vacuum leaks, exhaust system leaks, or problems with the engine's fuel system.

4. How can I diagnose the OBDII code P015B in my Infiniti?

Diagnosis typically involves using an OBDII scanner to read the code, inspecting the air-fuel ratio sensor and its wiring, checking for leaks in the exhaust and vacuum systems, and testing the fuel system components.

5. Can I continue driving my Infiniti with the OBDII code P015B?

It is not recommended to ignore the code and continue driving, as it can lead to further damage to the engine and emissions system. It is best to address the issue promptly.

6. How can I repair OBDII code P015B in my Infiniti?

Repair options may include replacing the air-fuel ratio sensor, repairing or replacing damaged wiring, fixing any vacuum or exhaust leaks, and addressing any fuel system issues.

7. Will resetting the check engine light resolve OBDII code P015B in my Infiniti?

Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing the code. It is important to diagnose and repair the problem to prevent further issues.

8. Can a DIY enthusiast fix OBDII code P015B in an Infiniti?

Depending on their skill level and access to tools, a DIY enthusiast may be able to address some aspects of the issue, such as checking for loose connections or replacing the air-fuel ratio sensor. However, more complex repairs may require professional assistance.

9. How long does it take to repair OBDII code P015B in an Infiniti?

The repair time can vary based on the specific cause of the code and the extent of the repairs needed. It could take anywhere from a few hours to a full day to diagnose and fix the issue.

10. Is OBDII code P015B a common issue in Infiniti vehicles?

While it may not be as common as some other codes, issues with air-fuel ratio sensors and related components can occur in various Infiniti models, so it's essential to address the problem promptly when it arises.