AutoCodesMitsubishi – P0158 Mitsubishi

P0158 Mitsubishi Code - Cylinder 2-3 Heated Oxygen Rear Sensor Circuit High Voltage

Quick Answer

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0158 Mitsubishi indicates Cylinder 2-3 Heated Oxygen Rear Sensor Circuit High Voltage.
Common causes
Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 7,079
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0158 Mitsubishi Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
OBDII Code P0158 Mitsubishi - Cylinder 2-3 Heated Oxygen Rear Sensor Circuit High Voltage - AutoCodes.com
P0158 Mitsubishi Code - Cylinder 2-3 Heated Oxygen Rear Sensor Circuit High Voltage

What are the Possible Causes of the DTC P0158 Mitsubishi?

  • Faulty Rear Heated Oxygen Sensor Bank 2
  • Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks
  • Exhaust gas leaks

How to Fix the DTC P0158 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0158 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0158 Mitsubishi code?

Need more information on how to fix the P0158 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0158 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0158 Mitsubishi Code

What does the OBDII code P0158 mean for a Mitsubishi?

It indicates high voltage in the heated oxygen sensor circuit for the rear sensor on cylinders 2-3, suggesting an issue with the sensor or related components.

What are the common symptoms of code P0158 in a Mitsubishi?

Symptoms may include poor fuel economy, rough idling, engine hesitation, and an illuminated check engine light.

What causes code P0158 in a Mitsubishi?

Common causes include a faulty oxygen sensor, damaged wiring, short circuits, or issues with the engine control module (ECM).

Can a bad oxygen sensor trigger code P0158?

Yes, a malfunctioning oxygen sensor can cause high voltage readings, leading to this code.

How can you diagnose code P0158 in a Mitsubishi?

You can inspect the wiring and connector for damage, check the oxygen sensor voltage with a multimeter, and use a scan tool to monitor live data.

Can driving with code P0158 damage the engine?

Prolonged driving with this code may lead to poor performance and increased emissions, potentially damaging the catalytic converter over time.

How do you fix code P0158 in a Mitsubishi?

Repairs may include replacing the oxygen sensor, repairing wiring, or addressing ECM issues if necessary.

How much does it cost to repair code P0158 in a Mitsubishi?

Depending on the issue, repairs may cost $150–$450, with oxygen sensor replacement being the most common fix.

Can a dirty or contaminated sensor cause code P0158?

Yes, contamination from oil or coolant leaks can affect sensor performance and trigger this code.

Should the oxygen sensor be replaced immediately after code P0158 appears?

Not necessarily; perform a proper diagnosis to ensure the sensor is the issue before replacing it.

Discuss the causes and fixes for P0158 Mitsubishi OBDII Code

Code P0158 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play