AutoCodes - OBDII Code List - P0158 DODGE

P0158 DODGE - O2 Sensor 2/2 Circuit High

Repair Importance Level: 2/3
Repair Difficulty Level: 2/3
Table of contents

P0158 DODGE Possible Causes

  • Faulty Rear Heated Oxygen Sensor Bank 2
  • Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks
  • Exhaust gas leaks

How do I fix code P0158 DODGE?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
How much do you know about cars?

Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge

Play Now

Tech Notes

Replacing the Rear Heated Oxygen Sensor Bank 2 usually takes care of the problem.





User Submitted Video

Cost of diagnosing the P0158 DODGE code

Labor: 1.0

The cost of diagnosing the P0158 DODGE code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

When is the code detected?

The P0158 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor signal voltage remains excessively high for an extended period of time.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible higher than usual fuel consumption

P0158 DODGE Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
OBDII Code P0158 Dodge - O2 Sensor 2/2 Circuit High - AutoCodes.com

More Information

Need more information on how to fix the P0158 DODGE code?
Get Access to Factory Service Manuals

Need more help?

Get the P0158 Dodge code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0158 Dodge code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 2
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?

Support AutoCodes.com