AutoCodes – Ford – P0158 2007 Ford Fusion

P0158 2007 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 2

Quick Answer

The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0158 2007 Ford Fusion indicates O2 Sensor Circuit High Voltage Bank 2 Sensor 2.
Common causes
Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,057
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0158 2007 Ford Fusion Description

The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. The code is set when the HO2S signal voltage is 1.5 volts or greater.
OBDII Code P0158 2007 Ford Fusion - O2 Sensor Circuit High Voltage Bank 2 Sensor 2 - AutoCodes.com
P0158 2007 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 2

What are the Possible Causes of the DTC P0158 2007 Ford Fusion?

  • Faulty Rear Heated Oxygen Sensor Bank 2
  • Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks
  • Exhaust gas leaks

How to Fix the DTC P0158 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0158 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0158 2007 Ford Fusion code?

Need more information on how to fix the P0158 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0158 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0158 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P0158 on a 2007 Ford Fusion?

- The common symptoms include decreased fuel efficiency, rough idling, engine misfires, and the illumination of the Check Engine Light.

2. What does the OBDII code P0158 for a 2007 Ford Fusion indicate?

- The code signifies an issue with the O2 sensor circuit high voltage on Bank 2 Sensor 2 in the exhaust system.

3. What are the possible causes of O2 sensor circuit high voltage Bank 2 Sensor 2 on a 2007 Ford Fusion?

- Potential causes include a faulty O2 sensor, damaged wiring or connectors, exhaust leaks, issues with the catalytic converter, or a malfunctioning engine control module.

4. How can I diagnose the O2 sensor circuit high voltage issue on Bank 2 Sensor 2 in my 2007 Ford Fusion?

- Use an OBDII scanner to retrieve the trouble code, visually inspect the sensor and its wiring, perform voltage tests, and check for exhaust system leaks to diagnose the problem.

5. Can I drive my 2007 Ford Fusion with the OBDII code P0158 present?

- It is recommended to address the issue promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

6. How do I repair the O2 sensor circuit high voltage Bank 2 Sensor 2 issue on my 2007 Ford Fusion?

- Repair options may include replacing the faulty O2 sensor, repairing damaged wiring or connectors, fixing any exhaust leaks, or addressing issues with the catalytic converter.

7. Is it possible to reset the OBDII code P0158 on a 2007 Ford Fusion without addressing the underlying issue?

- While clearing the code may temporarily turn off the Check Engine Light, it is crucial to fix the root cause of the problem to prevent further issues.

8. Can a DIY enthusiast fix the O2 sensor circuit high voltage Bank 2 Sensor 2 problem on a 2007 Ford Fusion?

- Depending on the individual's skill level and access to tools, some DIY repairs like sensor replacement or minor wiring fixes may be possible. Complex issues may require professional help.

9. How much does it typically cost to repair the O2 sensor circuit high voltage Bank 2 Sensor 2 issue on a 2007 Ford Fusion?

- The cost can vary depending on the root cause of the problem, but expenses may include parts like the O2 sensor, labor costs, and potential additional repairs to the exhaust system.

10. What are the long-term effects of ignoring the OBDII code P0158 on a 2007 Ford Fusion?

- Ignoring the issue can lead to decreased fuel efficiency, potential damage to the catalytic converter, and overall poor engine performance. It is advisable to address the problem promptly.

Discuss the causes and fixes for P0158 2007 Ford Fusion OBDII Code

Code P0158 2007 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play