AutoCodes – Mazda – P0157 Mazda

P0157 Mazda Code - HO2S LR Circuit Low Input

Quick Answer

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0157 Mazda indicates HO2S LR Circuit Low Input.
Common causes: Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,458

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0157 Mazda Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.

OBDII Code P0157 Mazda - HO2S LR Circuit Low Input - AutoCodes.com — P0157 Mazda Code - HO2S LR Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0157 Mazda?

Faulty Rear Heated Oxygen Sensor Bank 2
Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

How to Fix the DTC P0157 Mazda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensor Bank 2 usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0157 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0157 Mazda code?

Need more information on how to fix the P0157 Mazda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0157 Mazda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0157 Mazda Code

1. What are common symptoms of OBDII code P0157 in a Mazda?

Common symptoms include poor fuel economy, rough idling, engine stalling, and the illumination of the Check Engine Light.

2. What does the HO2S LR Circuit Low Input mean in relation to OBDII code P0157 in a Mazda?

The code indicates that the oxygen sensor in the left bank of the engine is sending a signal indicating a low voltage input.

3. What are the potential causes of OBDII code P0157 in a Mazda?

Possible causes include a faulty oxygen sensor, wiring issues, exhaust leaks, engine misfires, or a problem with the engine control module.

4. How can I diagnose the HO2S LR Circuit Low Input issue in my Mazda?

Diagnosis typically involves using a scan tool to read the code, testing the oxygen sensor's voltage output, inspecting the sensor's wiring for damage, and checking for any exhaust system leaks.

5. Can I still drive my Mazda with OBDII code P0157 present?

It is generally not recommended to drive with this code active, as it can lead to decreased fuel efficiency and potential engine performance issues.

6. How can I repair OBDII code P0157 in my Mazda?

Repair options may include replacing the oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, addressing engine misfires, or reprogramming the engine control module.

7. Is it possible to reset the Check Engine Light after fixing OBDII code P0157 in a Mazda?

Yes, once the underlying issue is resolved and the fault codes are cleared, the Check Engine Light can be reset using a scan tool.

8. How much does it typically cost to repair OBDII code P0157 in a Mazda?

The cost of repair can vary depending on the specific cause of the issue and the labor rates in your area, but it may range from around $100 for a DIY oxygen sensor replacement to several hundred dollars for more complex repairs at a dealership.

9. Are there any maintenance tips to prevent OBDII code P0157 from occurring in my Mazda?

Regularly scheduled maintenance, including checking and replacing oxygen sensors as recommended by the manufacturer, can help prevent issues like P0157 from occurring.

10. Can OBDII code P0157 in a Mazda cause damage to the engine if left unresolved?

While driving with this code may not immediately damage the engine, prolonged operation with a faulty oxygen sensor can lead to decreased fuel efficiency and potential long-term damage to the catalytic converter.