AutoCodes – Ford – P0155 2009 Ford Fusion

P0155 2009 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

Quick Answer

During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0155 2009 Ford Fusion indicates O2 Heater Circuit Bank 2 Sensor 1.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,085
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0155 2009 Ford Fusion Description

During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. The test fails when the current draw exceeds a calibrated limit or an open or short circuit is detected.
OBDII Code P0155 2009 Ford Fusion - O2 Heater Circuit Bank 2 Sensor 1 - AutoCodes.com
P0155 2009 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

What are the Possible Causes of the DTC P0155 2009 Ford Fusion?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0155 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0155 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0155 2009 Ford Fusion code?

Need more information on how to fix the P0155 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0155 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0155 2009 Ford Fusion Code

1. What does OBDII code P0155 on a 2009 Ford Fusion mean?

The code P0155 indicates an issue with the O2 sensor heater circuit in Bank 2 Sensor 1 of the vehicle.

2. What are the common symptoms of OBDII code P0155 in a 2009 Ford Fusion?

Common symptoms of this code may include poor fuel economy, rough idling, engine misfires, and an illuminated check engine light.

3. What are the potential causes of OBDII code P0155 in a 2009 Ford Fusion?

Possible causes of this code include a faulty O2 sensor, damaged wiring or connectors in the sensor circuit, or a blown fuse related to the O2 sensor heater.

4. How can I diagnose OBDII code P0155 in my 2009 Ford Fusion?

Diagnosing this code usually involves checking the O2 sensor heater circuit for continuity, inspecting wiring for damage, and testing the sensor's heater resistance using a multimeter.

5. Can I still drive my 2009 Ford Fusion with OBDII code P0155?

While you can drive the vehicle with this code, it is advisable to address the issue promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

6. How can I repair OBDII code P0155 in my 2009 Ford Fusion?

Repairing this code typically involves replacing the faulty O2 sensor in Bank 2 Sensor 1, repairing any damaged wiring or connectors, and ensuring the sensor heater circuit is functioning properly.

7. Is it possible to clear OBDII code P0155 in a 2009 Ford Fusion without fixing the issue?

Clearing the code without addressing the underlying problem may temporarily turn off the check engine light, but the issue will likely reoccur, affecting the vehicle's performance and emissions.

8. Will OBDII code P0155 in a 2009 Ford Fusion cause the vehicle to fail an emissions test?

Yes, this code can cause the vehicle to fail an emissions test due to improper oxygen sensor function, which affects the vehicle's emissions levels.

9. How much does it cost to repair OBDII code P0155 in a 2009 Ford Fusion?

The cost of repairing this code can vary depending on the cause of the issue, the labor rates of the repair shop, and whether genuine Ford parts are used. It is recommended to obtain quotes from reputable mechanics.

10. How often does OBDII code P0155 occur in a 2009 Ford Fusion?

The occurrence of this code can vary depending on the vehicle's mileage, maintenance history, and driving conditions. Regular maintenance and timely O2 sensor replacements can help prevent this code from appearing frequently.

Discuss the causes and fixes for P0155 2009 Ford Fusion OBDII Code

Code P0155 2009 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play