P0153 2010 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 2 Sensor 1
Quick Answer
The powertrain control module(PCM) commands an air/fuel ratio that changes in the shape of a square wave. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0153 2010 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0153 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0153 2010 Ford Fusion?
- Faulty Front Heated Oxygen Sensor Bank 2
- Front Heated Oxygen Sensor Bank 2 harness is open or shorted
- Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks
- Exhaust gas leaks
How to Fix the DTC P0153 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0153 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0153 2010 Ford Fusion code?
Need more information on how to fix the P0153 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0153 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0153 2010 Ford Fusion Code
1. What are the common symptoms of OBDII code P0153 on a 2010 Ford Fusion?
- Common symptoms include poor fuel economy, rough idling, hesitation during acceleration, and the illumination of the check engine light.
2. What does the OBDII code P0153 indicating "O2 Sensor Circuit Slow Response Bank 2 Sensor 1" mean for a 2010 Ford Fusion?
- This code indicates that the oxygen sensor in bank 2, sensor 1 of the exhaust system is not responding as quickly as expected.
3. What are the possible causes of OBDII code P0153 on a 2010 Ford Fusion?
- The potential causes include a faulty oxygen sensor, wiring issues in the O2 sensor circuit, vacuum leaks, exhaust leaks, or a problem with the engine's air-fuel mixture.
4. How can I diagnose the O2 sensor circuit slow response issue on bank 2 sensor 1 in my 2010 Ford Fusion?
- You can use an OBDII scanner to read the code, visually inspect the sensor and its wiring for any damage, and perform a voltage test to check the sensor's response time.
5. Can I continue driving my 2010 Ford Fusion with OBDII code P0153?
- It is not recommended to continue driving with this code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. How can I repair OBDII code P0153 on a 2010 Ford Fusion?
- The repair typically involves replacing the oxygen sensor in bank 2, sensor 1, fixing any wiring or connection issues, and clearing the fault code with an OBDII scanner.
7. Are there any DIY tips for fixing the O2 sensor circuit slow response issue on bank 2 sensor 1 in a 2010 Ford Fusion?
- While some may attempt to replace the oxygen sensor themselves, it's advisable to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.
8. How much does it cost to fix OBDII code P0153 on a 2010 Ford Fusion?
- The cost of repair can vary depending on the root cause of the issue, but it typically ranges from $150 to $400, including parts and labor.
9. Can a dirty air filter cause OBDII code P0153 on a 2010 Ford Fusion?
- While a dirty air filter can affect the engine's performance, it is unlikely to directly cause the O2 sensor circuit slow response issue indicated by code P0153.
10. Is it necessary to reset the PCM after fixing OBDII code P0153 on a 2010 Ford Fusion?
- Yes, it is recommended to reset the PCM (Powertrain Control Module) using an OBDII scanner after repairing the issue to clear the fault code and ensure the system recognizes the repair.
Discuss the causes and fixes for P0153 2010 Ford Fusion OBDII Code
Code P0153 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
