AutoCodes – Chevrolet – P0151 2018 Chevrolet Silverado

P0151 2018 Chevrolet Silverado Code - HO2S Circuit Low Voltage Bank 2 Sensor 1

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0151 2018 Chevrolet Silverado indicates HO2S Circuit Low Voltage Bank 2 Sensor 1.
Common causes: Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 337

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 27, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0151 2018 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the heated oxygen sensor is shorted to ground if the HO2S voltage is less than 50 mV.

OBDII Code P0151 2018 Chevrolet Silverado - HO2S Circuit Low Voltage Bank 2 Sensor 1 - AutoCodes.com — P0151 2018 Chevrolet Silverado Code - HO2S Circuit Low Voltage Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0151 2018 Chevrolet Silverado?

Faulty Front Heated Oxygen Sensor Bank 2
Front Heated Oxygen Sensor Bank 2 harness is open or shorted
Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Low or high fuel system pressure
Fuel contamination
Faulty fuel injectors
Exhaust gas leaks
Engine vacuum leaks

How to Fix the DTC P0151 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Front Heated Oxygen Sensor (HO2S) Bank 2 usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0151 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0151 2018 Chevrolet Silverado code?

Need more information on how to fix the P0151 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0151 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0151 2018 Chevrolet Silverado Code

1. What does the OBDII code P0151 for a 2018 Chevrolet Silverado indicate?

- The code P0151 refers to a problem with the HO2S (Heated Oxygen Sensor) Circuit Low Voltage for Bank 2 Sensor 1 in a 2018 Chevrolet Silverado.

2. What are the common symptoms of OBDII code P0151 in a 2018 Chevrolet Silverado?

- Common symptoms of P0151 may include poor fuel economy, rough idling, stalling, or a noticeable decrease in engine performance.

3. What are the possible causes of OBDII code P0151 in a 2018 Chevrolet Silverado?

- Potential causes of P0151 can include a faulty oxygen sensor, wiring issues in the sensor circuit, a vacuum leak, exhaust system problems, or a malfunctioning engine control module (ECM).

4. How can I diagnose the OBDII code P0151 in my 2018 Chevrolet Silverado?

- To diagnose P0151, you can use an OBDII scanner to read the fault code, visually inspect the oxygen sensor and its wiring, check for any exhaust leaks, and perform voltage tests on the sensor.

5. Can I still drive my 2018 Chevrolet Silverado with the P0151 code?

- It is generally not recommended to continue driving your Silverado with an unresolved P0151 code, as it can lead to further damage and potentially affect the vehicle's performance and fuel efficiency.

6. How can I repair the OBDII code P0151 in a 2018 Chevrolet Silverado?

- Repairing P0151 may involve replacing the Bank 2 Sensor 1 oxygen sensor, repairing or replacing damaged wiring, fixing any exhaust leaks, or addressing any other underlying issues causing the low voltage signal.

7. Is it possible to reset the OBDII code P0151 in a 2018 Chevrolet Silverado without fixing the issue?

- While you can clear the fault code using an OBDII scanner, the code is likely to return if the underlying problem triggering the P0151 is not addressed.

8. How much does it cost to fix the OBDII code P0151 in a 2018 Chevrolet Silverado?

- The cost of repairing P0151 can vary depending on the specific cause of the issue, but it may involve expenses for parts, labor, and diagnostic services. Contact a mechanic for an accurate estimate.

9. Can a DIY enthusiast fix the OBDII code P0151 in a 2018 Chevrolet Silverado?

- Depending on your automotive repair skills and access to tools, DIY enthusiasts may be able to address simpler causes of P0151, such as replacing the oxygen sensor or repairing minor wiring issues.

10. How often does the OBDII code P0151 occur in a 2018 Chevrolet Silverado?

- The occurrence of P0151 can vary depending on factors like vehicle maintenance, driving conditions, and overall vehicle health. Regular maintenance can help prevent issues leading to this code.