AutoCodes – Dodge – P014C Dodge

P014C Dodge Code - Oxygen Sensor 1/1 Slow Response Rich to Lean

Quick Answer

The engine after treatment system monitor the oxygen content in the diesel engine exhaust. Common causes include Excessive fuel entering the aftertreatment / exhaust system, Faulty Mass Air Flow (MAF) sensor, Engine misfire. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P014C Dodge indicates Oxygen Sensor 1/1 Slow Response Rich to Lean.
Common causes
Common causes include Excessive fuel entering the aftertreatment / exhaust system, Faulty Mass Air Flow (MAF) sensor, Engine misfire.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 14,664
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 13, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P014C Dodge Description

The engine after treatment system monitor the oxygen content in the diesel engine exhaust. The Powertrain Control Module (PCM) monitor the exhaust gases for oxygen content and varies the rich/lean fuel mixture of the intake air fuel mixture to adjust the system. This diagnosis monitor the status message broadcast by the Smart O2 sensor module for the upstream O2 sensor circuit. The PCM will set the fault if it receives an FMI (failure Mode Indicator) message from the Smart O2 Module. The PCM will illuminate the MIL lamp immediately when the diagnostic runs and fails. The PCM will turn off the MIL lamp diagnostic runs and passes in four consecutive drive cycles.
OBDII Code P014C Dodge - Oxygen Sensor 1/1 Slow Response Rich to Lean - AutoCodes.com
P014C Dodge Code - Oxygen Sensor 1/1 Slow Response Rich to Lean

What are the Possible Causes of the DTC P014C Dodge?

  • Excessive fuel entering the aftertreatment / exhaust system
  • Faulty Mass Air Flow (MAF) sensor
  • Engine misfire
  • Intake leak
  • Exhaust leak
  • Faulty EGR system
  • Faulty Oxygen (O2) Sensor 1/2 (Sensor 1 / Bank 1) (Upstream / Bank 1)
  • Faulty Oxygen (O2) Sensor Module

How to Fix the DTC P014C Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014C Dodge code?

Need more information on how to fix the P014C Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014C Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014C Dodge Code

No Frequently Asked Questions about P014C Dodge Code found.

Discuss the causes and fixes for P014C Dodge OBDII Code

Code P014C Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play