AutoCodes – Buick – P014B Buick

P014B Buick Code - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P014B Buick indicates HO2S Delayed Response Lean to Rich Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,085

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 28, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P014B Buick Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.

OBDII Code P014B Buick - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2 - AutoCodes.com — P014B Buick Code - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P014B Buick?

Faulty Heated Oxygen Bank 2 Sensor 2
Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
Low or high fuel system pressure
Fuel contamination
Faulty fuel injectors
Exhaust gas leaks
Engine vacuum leaks

How to Fix the DTC P014B Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensors (HO2S) usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014B Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014B Buick code?

Need more information on how to fix the P014B Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014B Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014B Buick Code

1. What are the common symptoms of OBDII code P014B in a Buick related to HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- Common symptoms include poor fuel economy, rough idling, hesitation or misfiring, and the illumination of the Check Engine Light.

2. What are the possible causes of OBDII code P014B in a Buick indicating HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- Possible causes include a faulty oxygen sensor, vacuum leaks, exhaust leaks, fuel system issues, or a problem with the engine's air intake system.

3. How can I diagnose the OBDII code P014B in a Buick related to HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- Diagnosis typically involves using a scan tool to read the code, inspecting the oxygen sensor and its wiring for damage, checking for leaks in the exhaust system, and testing the fuel system's pressure and delivery.

4. What are the recommended repair tips for fixing OBDII code P014B in a Buick indicating HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- Repair tips may include replacing the oxygen sensor, repairing any leaks in the exhaust or vacuum system, cleaning or replacing the fuel injectors, and ensuring proper air intake to the engine.

5. Can I drive my Buick with OBDII code P014B related to HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- It is not recommended to drive your vehicle for an extended period with this code as it can lead to poor engine performance and potential damage over time. It's best to address the issue promptly.

6. Will resetting the Check Engine Light resolve OBDII code P014B in a Buick?

- Resetting the Check Engine Light may temporarily turn it off, but it will not fix the underlying issue causing the code. It's essential to diagnose and repair the problem to prevent further issues.

7. How much does it typically cost to repair OBDII code P014B in a Buick related to HO2S Delayed Response Lean to Rich Bank 2 Sensor 2?

- The cost of repair can vary depending on the specific underlying issue, but it may range from $100 to $500 or more, including parts and labor.

8. Can a DIY enthusiast fix OBDII code P014B in a Buick themselves?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address this code by replacing the oxygen sensor or fixing minor leaks. However, more complex issues may require professional assistance.

9. How often should I have my oxygen sensors inspected to prevent OBDII code P014B in a Buick?

- It is recommended to have your oxygen sensors inspected during routine maintenance intervals, typically every 30,000 to 60,000 miles, to catch potential issues before they trigger a fault code like P014B.

10. Are there any recalls related to OBDII code P014B in Buick vehicles?

- It's essential to check with your vehicle manufacturer or the National Highway Traffic Safety Administration (NHTSA) to see if there are any recalls related to this specific code in Buick vehicles.