AutoCodesChevrolet – P014B 2014 Chevrolet Silverado

P014B 2014 Chevrolet Silverado Code - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P014B 2014 Chevrolet Silverado indicates HO2S Delayed Response Lean to Rich Bank 2 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 327
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 28, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P014B 2014 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.
OBDII Code P014B 2014 Chevrolet Silverado - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2 - AutoCodes.com
P014B 2014 Chevrolet Silverado Code - HO2S Delayed Response Lean to Rich Bank 2 Sensor 2

What are the Possible Causes of the DTC P014B 2014 Chevrolet Silverado?

  • Faulty Heated Oxygen Bank 2 Sensor 2
  • Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
  • Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P014B 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014B 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014B 2014 Chevrolet Silverado code?

Need more information on how to fix the P014B 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014B 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014B 2014 Chevrolet Silverado Code

1. What does the OBDII code P014B mean on a 2014 Chevrolet Silverado?

P014B indicates "HO2S Delayed Response Lean to Rich Bank 2 Sensor 2," which means the oxygen sensor on Bank 2 (downstream of the catalytic converter) is not switching from lean to rich quickly enough.

2. What are the symptoms of code P014B on a 2014 Chevrolet Silverado?

Common symptoms include a check engine light, reduced fuel efficiency, poor engine performance, and potentially a failed emissions test.

3. What causes the P014B code to appear?

Possible causes include a faulty oxygen sensor, exhaust leaks, damaged wiring or connectors, or engine issues causing an improper air-to-fuel mixture.

4. Which part is affected by code P014B on a 2014 Chevrolet Silverado?

The code specifically relates to the downstream oxygen sensor (Bank 2 Sensor 2) located after the catalytic converter on the side of the engine opposite Cylinder 1.

5. Can I drive my 2014 Chevrolet Silverado with a P014B code?

While the vehicle may still be drivable, prolonged use with this code can lead to reduced performance, increased emissions, and potential damage to the catalytic converter.

6. How do I diagnose the P014B code on a 2014 Chevrolet Silverado?

Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the oxygen sensor and wiring, checking for exhaust leaks, and monitoring live sensor data for delays in switching.

7. How do I fix the P014B code on a 2014 Chevrolet Silverado?

Repairs may include replacing the Bank 2 Sensor 2 oxygen sensor, fixing exhaust leaks, repairing damaged wiring or connectors, or addressing any engine issues affecting the air-fuel ratio.

8. How much does it cost to repair the P014B code on a 2014 Chevrolet Silverado?

Replacing an oxygen sensor typically costs $100–$300, including parts and labor. Costs may increase if additional repairs, such as fixing exhaust leaks, are required.

9. Can a bad catalytic converter cause the P014B code?

Yes, a failing catalytic converter can affect downstream oxygen sensor readings, potentially triggering the P014B code.

10. How can I prevent the P014B code from occurring on my 2014 Chevrolet Silverado?

Regular maintenance, such as inspecting the exhaust system for leaks, ensuring proper engine performance, and replacing oxygen sensors as needed, can help prevent this code.

Discuss the causes and fixes for P014B 2014 Chevrolet Silverado OBDII Code

Code P014B 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play