AutoCodes – Mercury – P014A Mercury

P014A Mercury Code - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 2

Quick Answer

During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P014A Mercury indicates Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,275

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 13, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P014A Mercury Description

During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. The PCM expects the signal to exceed a calibrated rich or lean value within a calibrated amount of time. If the signal voltage remains less than the rich value after a number of occurrences, the PCM intrusively controls the fuel system rich over increasing time periods in an attempt to force the signal to greater than the calibrated rich value. The test fails when, after three consecutive intrusive attempts, the signal cannot be forced greater than the calibrated rich value. Also, if the signal voltage remains greater than the lean value after a calibrated amount of time with the fuel injectors off, a counter is incremented. The test fails when after three consecutive occurrences the signal is not less than the calibrated lean value.

OBDII Code P014A Mercury - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 2 - AutoCodes.com — P014A Mercury Code - Oxygen Sensor Delayed Response Rich to Lean Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P014A Mercury?

Faulty Heated Oxygen Bank 2 Sensor 2
Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Exhaust leaks before or near the Heated Oxygen Bank 2 Sensor 2

How to Fix the DTC P014A Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014A Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014A Mercury code?

Need more information on how to fix the P014A Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014A Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014A Mercury Code

1. What are the common symptoms of OBDII code P014A in a Mercury vehicle?

- Common symptoms include decreased fuel efficiency, rough idling, and hesitation during acceleration.

2. What does the OBDII code P014A Mercury signify?

- The code indicates a delayed response from the oxygen sensor located downstream (post-catalytic converter) on bank 2, sensor 2, signaling a transition from a rich to lean fuel mixture.

3. What are the possible causes of OBDII code P014A in a Mercury?

- Potential causes include a faulty oxygen sensor, wiring issues, exhaust leaks, a malfunctioning catalytic converter, or a problem with the engine's air-fuel ratio.

4. How can I diagnose the OBDII code P014A in my Mercury?

- Diagnosing the issue involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and testing the catalytic converter's efficiency.

5. Can I drive my Mercury with the OBDII code P014A present?

- It is not recommended to drive the vehicle with this code active, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.

6. How do I repair OBDII code P014A in my Mercury?

- Repair options may include replacing the oxygen sensor, repairing any wiring issues, fixing exhaust leaks, or replacing the catalytic converter if necessary.

7. Is it possible to reset the OBDII code P014A in my Mercury without fixing the underlying issue?

- While you can clear the code temporarily, it is crucial to address the root cause to prevent further engine problems and ensure optimal vehicle performance.

8. Can a DIY enthusiast fix OBDII code P014A in a Mercury?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address this code by replacing the oxygen sensor or repairing wiring issues. However, complex issues may require professional assistance.

9. How much does it typically cost to repair OBDII code P014A in a Mercury at a mechanic or dealership?

- Repair costs can vary depending on the specific issue causing the code, but replacing an oxygen sensor or repairing wiring may cost a few hundred dollars, while replacing a catalytic converter can be more expensive.

10. Are there any preventive maintenance tips to avoid OBDII code P014A in a Mercury?

- Regularly servicing your vehicle, using high-quality fuel, and addressing any engine performance issues promptly can help prevent the occurrence of OBDII code P014A in your Mercury.