AutoCodesChevrolet – P014A 2016 Chevrolet Silverado

P014A 2016 Chevrolet Silverado Code - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P014A 2016 Chevrolet Silverado indicates HO2S Delayed Response Rich to Lean Bank 2 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 251
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 28, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P014A 2016 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not decreased below 450 mV within a calibrated value of accumulated airflow.
OBDII Code P014A 2016 Chevrolet Silverado - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2 - AutoCodes.com
P014A 2016 Chevrolet Silverado Code - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2

What are the Possible Causes of the DTC P014A 2016 Chevrolet Silverado?

  • Faulty Heated Oxygen Bank 2 Sensor 2
  • Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
  • Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P014A 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014A 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014A 2016 Chevrolet Silverado code?

Need more information on how to fix the P014A 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014A 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014A 2016 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P014A on a 2016 Chevrolet Silverado?

- Common symptoms include rough idle, decreased fuel efficiency, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P014A "HO2S Delayed Response Rich to Lean Bank 2 Sensor 2" mean on a 2016 Chevrolet Silverado?

- This code indicates that the downstream oxygen sensor in Bank 2, Sensor 2 is taking too long to switch from a rich to lean air-fuel mixture, potentially causing engine performance issues.

3. What are the possible causes of OBDII code P014A on a 2016 Chevrolet Silverado?

- Common causes include a faulty oxygen sensor, wiring issues, exhaust leaks, vacuum leaks, fuel system problems, or a malfunctioning engine control module.

4. How can I diagnose the OBDII code P014A on my 2016 Chevrolet Silverado?

- Diagnosing this code typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring for damage, checking for exhaust or vacuum leaks, and testing the fuel system components.

5. Is it safe to continue driving with OBDII code P014A present on a 2016 Chevrolet Silverado?

- It is not recommended to continue driving with this code active, as it can lead to decreased engine performance, increased emissions, and potential damage to other vehicle components.

6. Can I repair OBDII code P014A on my 2016 Chevrolet Silverado myself?

- While it is possible to address some causes of this code yourself, such as replacing the oxygen sensor, more complex issues may require professional diagnosis and repair to ensure the problem is properly resolved.

7. How much does it typically cost to repair OBDII code P014A on a 2016 Chevrolet Silverado?

- The cost of repairing this code can vary depending on the underlying cause. Simple fixes like replacing an oxygen sensor may cost around $100-$200, while addressing more complex issues could range from $200 to $500 or more.

8. What are some tips to prevent OBDII code P014A from recurring on a 2016 Chevrolet Silverado?

- Regular maintenance, including timely replacement of oxygen sensors, checking for and repairing exhaust leaks, and using quality fuel, can help prevent the recurrence of this code.

9. Can a faulty oxygen sensor cause other OBDII codes besides P014A on a 2016 Chevrolet Silverado?

- Yes, a faulty oxygen sensor can contribute to a variety of OBDII codes related to the engine's air-fuel mixture, emissions, and overall performance.

10. How urgent is it to address OBDII code P014A on a 2016 Chevrolet Silverado?

- While the vehicle may still be operable with this code present, it is important to address it promptly to prevent potential damage to the engine and ensure optimal performance and fuel efficiency.

Discuss the causes and fixes for P014A 2016 Chevrolet Silverado OBDII Code

Code P014A 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play