AutoCodes – Chevrolet – P014A 2015 Chevrolet Silverado

P014A 2015 Chevrolet Silverado Code - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P014A 2015 Chevrolet Silverado indicates HO2S Delayed Response Rich to Lean Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 300

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 28, 2022

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P014A 2015 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not decreased below 450 mV within a calibrated value of accumulated airflow.

OBDII Code P014A 2015 Chevrolet Silverado - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2 - AutoCodes.com — P014A 2015 Chevrolet Silverado Code - HO2S Delayed Response Rich to Lean Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P014A 2015 Chevrolet Silverado?

Faulty Heated Oxygen Bank 2 Sensor 2
Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
Low or high fuel system pressure
Fuel contamination
Faulty fuel injectors
Exhaust gas leaks
Engine vacuum leaks

How to Fix the DTC P014A 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensors (HO2S) usually takes care of the problem.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P014A 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P014A 2015 Chevrolet Silverado code?

Need more information on how to fix the P014A 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P014A 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P014A 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P014A on a 2015 Chevrolet Silverado?

- Common symptoms include reduced fuel efficiency, rough idling, engine misfires, and the illumination of the Check Engine light.

2. What does the OBDII code P014A "HO2S Delayed Response Rich to Lean Bank 2 Sensor 2" mean for a 2015 Chevrolet Silverado?

- This code indicates that the downstream oxygen sensor in Bank 2, Sensor 2 is taking too long to switch from a rich to lean air/fuel mixture.

3. What are the possible causes of OBDII code P014A on a 2015 Chevrolet Silverado?

- Potential causes include a faulty oxygen sensor, wiring issues, exhaust leaks, engine vacuum leaks, or a problem with the engine's air/fuel mixture.

4. How can I diagnose the OBDII code P014A on my 2015 Chevrolet Silverado?

- Diagnosing this code typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and testing the engine's air/fuel ratio.

5. Can I continue driving my 2015 Chevrolet Silverado with the OBDII code P014A present?

- While the vehicle may still be driveable with this code, it is important to address the underlying issue promptly to prevent potential damage to the engine and emissions system.

6. How can I repair OBDII code P014A on my 2015 Chevrolet Silverado?

- Repair options may include replacing the Bank 2, Sensor 2 oxygen sensor, repairing any wiring issues, fixing exhaust leaks, addressing vacuum leaks, or correcting the air/fuel mixture problem.

7. Is it possible to reset the OBDII code P014A on a 2015 Chevrolet Silverado without fixing the issue?

- It is not recommended to simply reset the code without addressing the root cause, as the Check Engine light will likely reappear once the issue persists.

8. How much does it typically cost to fix OBDII code P014A on a 2015 Chevrolet Silverado?

- The cost of repairing this code can vary depending on the specific issue, but it may involve parts and labor expenses ranging from $100 to $500 or more.

9. Can a DIY enthusiast repair OBDII code P014A on a 2015 Chevrolet Silverado?

- While some aspects of diagnosing and repairing this code can be tackled by experienced DIYers, it is recommended to consult a professional mechanic for a comprehensive and accurate fix.

10. How often does OBDII code P014A occur in 2015 Chevrolet Silverado vehicles?

- The occurrence of this specific OBDII code can vary, but it is not uncommon in 2015 Chevrolet Silverado models with issues related to oxygen sensors or air/fuel mixture problems.