P0141 Subaru Code - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2
Quick Answer
Oxygen Sensors (O2S) or Heated Oxygen Sensors (HO2S) need to reach a minimum operating temperature of 750 degrees F to produce an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0141 Subaru indicates O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0141 Subaru Description
In order to achieve the require temperature, a heater element is included inside the heated oxygen sensor. The ECM controls the heated oxygen sensor heater element based on signals from the engine coolant temperature and engine load. The ECM controls the heater element circuit by allowing current flow to ground.
The ECM monitors the voltage signal received through the heater element circuit and determines the state of the circuit by comparing the voltage detected with the factory specifications.
What are the Possible Causes of the DTC P0141 Subaru?
- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0141 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0141 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0141 Subaru code?
Need more information on how to fix the P0141 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0141 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0141 Subaru Code
1. What are the common symptoms of OBDII code P0141 in a Subaru?
- Common symptoms include poor fuel economy, rough idling, and an illuminated check engine light.
2. What does OBDII code P0141 indicate in a Subaru?
- OBDII code P0141 indicates a malfunction in the O2 sensor heater circuit for Bank 1 Sensor 2 in a Subaru.
3. What are the possible causes of OBDII code P0141 in a Subaru?
- Possible causes include a faulty O2 sensor, damaged wiring or connectors, a blown fuse, or a problem with the ECM.
4. How can I diagnose the O2 sensor heater circuit malfunction in a Subaru?
- Diagnose the issue by checking the O2 sensor heater circuit for continuity, inspecting wiring and connectors for damage, and testing the fuse related to the sensor heater.
5. Can I drive my Subaru with OBDII code P0141?
- It is best to avoid driving the vehicle with this code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.
6. How can I repair OBDII code P0141 in my Subaru?
- Repair options include replacing the faulty O2 sensor, repairing damaged wiring or connectors, replacing a blown fuse, or addressing any ECM issues.
7. Is it safe to reset the check engine light after fixing OBDII code P0141 in a Subaru?
- Yes, after fixing the issue causing the code, you can safely reset the check engine light using an OBDII scanner.
8. What is the role of Bank 1 Sensor 2 in a Subaru's exhaust system?
- Bank 1 Sensor 2 is responsible for monitoring the oxygen levels in the exhaust after the catalytic converter to ensure proper fuel mixture.
9. How can I prevent O2 sensor heater circuit malfunctions in my Subaru?
- To prevent such malfunctions, it is essential to perform regular vehicle maintenance, avoid driving with a misfiring engine, and address any issues promptly.
10. Can a Subaru dealership help diagnose and fix OBDII code P0141?
- Yes, Subaru dealerships have the expertise and equipment to diagnose and repair OBDII code P0141 effectively.
Discuss the causes and fixes for P0141 Subaru OBDII Code
Code P0141 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
