AutoCodesChevrolet – P013F 2018 Chevrolet Silverado

P013F 2018 Chevrolet Silverado Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P013F 2018 Chevrolet Silverado indicates HO2S Delay Response Lean to Rich Bank 1 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 311
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 28, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P013F 2018 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.
OBDII Code P013F 2018 Chevrolet Silverado - HO2S Delay Response Lean to Rich Bank 1 Sensor 2 - AutoCodes.com
P013F 2018 Chevrolet Silverado Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2

What are the Possible Causes of the DTC P013F 2018 Chevrolet Silverado?

  • Faulty Heated Oxygen Bank 1 Sensor 2
  • Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
  • Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P013F 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P013F 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P013F 2018 Chevrolet Silverado code?

Need more information on how to fix the P013F 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P013F 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P013F 2018 Chevrolet Silverado Code

1. What does the OBDII code P013F mean on a 2018 Chevrolet Silverado?

P013F refers to "HO2S Delay Response Lean to Rich Bank 1 Sensor 2," indicating that the oxygen sensor (O2 sensor) in Bank 1, Sensor 2 is taking too long to detect changes from a lean to a rich mixture.

2. What are the symptoms of a P013F code on a 2018 Chevrolet Silverado?

Common symptoms include the check engine light turning on, reduced fuel efficiency, rough idling, and possibly a failed emissions test.

3. What causes the P013F code to appear on a Chevrolet Silverado?

The code can be caused by a faulty downstream oxygen sensor (Bank 1, Sensor 2), exhaust leaks, wiring issues, or an engine running too lean.

4. Can a dirty or clogged catalytic converter trigger a P013F code?

Yes, a restricted catalytic converter can affect the oxygen sensor’s performance, potentially causing the P013F code.

5. How do you diagnose a P013F code on a 2018 Chevrolet Silverado?

Diagnosis involves checking for exhaust leaks, inspecting the oxygen sensor and its wiring, and using a scan tool to monitor live data for the sensor's response times.

6. Can driving with a P013F code damage my Silverado?

Driving with this code may not cause immediate damage, but ignoring it could lead to poor fuel economy, increased emissions, and potential damage to the catalytic converter over time.

7. How can I fix the P013F code on my 2018 Chevrolet Silverado?

Repairs may involve replacing the downstream O2 sensor, fixing any exhaust leaks, repairing damaged wiring, or addressing fuel delivery issues.

8. How much does it cost to fix a P013F code on a Chevrolet Silverado?

The cost depends on the exact issue. Replacing an oxygen sensor typically costs between $150 and $400, while repairing exhaust leaks or wiring issues can vary.

9. Can a vacuum leak cause the P013F code to trigger?

While vacuum leaks typically affect upstream sensors, they may indirectly contribute to the issue if they cause the engine to run lean, affecting the downstream sensor’s readings.

10. Is it safe to clear the P013F code without repairs?

Clearing the code without addressing the root cause may temporarily turn off the check engine light, but the issue will likely return, potentially leading to further complications.

Discuss the causes and fixes for P013F 2018 Chevrolet Silverado OBDII Code

Code P013F 2018 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play