P013F 2016 GMC Sierra Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013F 2016 GMC Sierra indicates HO2S Delay Response Lean to Rich Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013F 2016 GMC Sierra Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.
What are the Possible Causes of the DTC P013F 2016 GMC Sierra?
- Faulty Heated Oxygen Bank 1 Sensor 2
- Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P013F 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013F 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013F 2016 GMC Sierra code?
Need more information on how to fix the P013F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013F 2016 GMC Sierra Code
1. What does the OBDII code P013F mean for a 2016 GMC Sierra?
P013F indicates that the downstream oxygen sensor (Bank 1 Sensor 2) is taking too long to switch from a lean to rich state, suggesting a delay in its response time.
2. What are the common symptoms of code P013F in a 2016 GMC Sierra?
Symptoms may include the check engine light turning on, reduced fuel efficiency, failed emissions tests, or no noticeable symptoms at all.
3. What causes the P013F code in a 2016 GMC Sierra?
Common causes include a faulty downstream oxygen sensor (Bank 1 Sensor 2), exhaust leaks, a damaged catalytic converter, wiring issues, or engine performance problems such as running too lean or rich.
4. How do I diagnose the P013F code in my GMC Sierra?
Start by inspecting the wiring and connections to the downstream oxygen sensor. Use a scan tool to monitor live data for sensor response times and check for exhaust leaks or other engine-related issues.
5. Can a faulty oxygen sensor trigger the P013F code?
Yes, a malfunctioning downstream oxygen sensor is one of the most common causes of the P013F code.
6. Is it safe to drive with a P013F code on my 2016 GMC Sierra?
While the vehicle may still be drivable, ignoring the code can lead to decreased fuel efficiency, possible damage to the catalytic converter, and failed emissions tests.
7. How can I fix the P013F code on my GMC Sierra?
Repairs may involve replacing the downstream oxygen sensor, fixing exhaust leaks, repairing damaged wiring, or addressing any engine performance issues.
8. How much does it cost to repair the P013F code?
Replacing an oxygen sensor typically costs between $150 and $300, including parts and labor. The cost may increase if additional repairs, such as fixing an exhaust leak, are required.
9. Can a dirty air filter cause the P013F code?
A dirty air filter can indirectly contribute to poor engine performance, which might affect oxygen sensor readings, but it is not a direct cause of the P013F code.
10. Will clearing the P013F code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P013F 2016 GMC Sierra OBDII Code
Code P013F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
