P013F 2015 Chevrolet Silverado Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013F 2015 Chevrolet Silverado indicates HO2S Delay Response Lean to Rich Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013F 2015 Chevrolet Silverado Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.
What are the Possible Causes of the DTC P013F 2015 Chevrolet Silverado?
- Faulty Heated Oxygen Bank 1 Sensor 2
- Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P013F 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013F 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013F 2015 Chevrolet Silverado code?
Need more information on how to fix the P013F 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013F 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013F 2015 Chevrolet Silverado Code
1. What does the OBDII code P013F mean for a 2015 Chevrolet Silverado?
P013F indicates that the oxygen sensor (HO2S) on Bank 1 Sensor 2 is taking too long to switch from a lean to a rich condition, suggesting a delay in response time.
2. What are the common symptoms of the P013F code?
Symptoms may include the check engine light turning on, decreased fuel efficiency, rough idling, or erratic engine performance.
3. What causes the P013F code to trigger?
Potential causes include a faulty downstream oxygen sensor, exhaust leaks, wiring issues, or contamination of the sensor due to oil or coolant.
4. How do I locate Bank 1 Sensor 2 on my 2015 Chevrolet Silverado?
Bank 1 refers to the side of the engine with cylinder 1, and Sensor 2 is the downstream oxygen sensor located after the catalytic converter.
5. Can a dirty or failing catalytic converter cause the P013F code?
Yes, a restricted or failing catalytic converter can affect exhaust flow and delay the oxygen sensor's response, triggering the code.
6. How can I fix the P013F code on my Silverado?
Start by inspecting and, if needed, replacing the oxygen sensor on Bank 1 Sensor 2. Check for exhaust leaks, damaged wiring, or a clogged catalytic converter.
7. Can I drive with the P013F code active on my 2015 Silverado?
While it may not cause immediate damage, driving with the P013F code can lead to reduced performance and fuel efficiency. Prolonged driving could exacerbate the issue.
8. How do I test the oxygen sensor to confirm it’s causing the P013F code?
You can use a multimeter or scan tool to check the sensor’s voltage and response time during lean-to-rich transitions to determine if it’s functioning properly.
9. What tools are needed to fix the P013F code?
You may need an OBDII scanner, a multimeter, basic hand tools, and possibly a replacement oxygen sensor or exhaust system components.
10. How much does it cost to repair the P013F code on a 2015 Chevrolet Silverado?
The cost varies depending on the issue. Replacing the oxygen sensor typically costs $200–$300, while more extensive repairs like fixing exhaust leaks or replacing the catalytic converter can be more expensive.
Discuss the causes and fixes for P013F 2015 Chevrolet Silverado OBDII Code
Code P013F 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
