P013F 2014 GMC Sierra Code - HO2S Delay Response Lean to Rich Bank 1 Sensor 2
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013F 2014 GMC Sierra indicates HO2S Delay Response Lean to Rich Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013F 2014 GMC Sierra Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the O2 sensor voltage has not increased above 350 mV within a calibrated value of accumulated airflow.
What are the Possible Causes of the DTC P013F 2014 GMC Sierra?
- Faulty Heated Oxygen Bank 1 Sensor 2
- Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P013F 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013F 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013F 2014 GMC Sierra code?
Need more information on how to fix the P013F 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013F 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013F 2014 GMC Sierra Code
1. What does the OBDII code P013F mean for a 2014 GMC Sierra?
P013F indicates that the downstream oxygen sensor (Bank 1, Sensor 2) is taking too long to switch from a lean to a rich state, suggesting a possible issue with fuel mixture monitoring or sensor performance.
2. What are the common symptoms of code P013F in a 2014 GMC Sierra?
Symptoms may include an illuminated Check Engine Light, reduced fuel efficiency, rough idling, or failed emissions tests.
3. What causes the P013F code to appear on a 2014 GMC Sierra?
Common causes include a faulty oxygen sensor, exhaust leaks, a damaged catalytic converter, or issues with the engine control module (ECM).
4. Can a dirty or faulty oxygen sensor trigger code P013F?
Yes, a dirty or malfunctioning oxygen sensor can delay the response time from lean to rich, causing this code to appear.
5. How can I diagnose the P013F code on my 2014 GMC Sierra?
Use an OBDII scanner to confirm the code, then inspect the downstream oxygen sensor, check for exhaust leaks, and test the sensor's response time with a multimeter.
6. Can driving with a P013F code damage my 2014 GMC Sierra?
Driving with this code for an extended period can lead to increased emissions, reduced fuel efficiency, and potential damage to the catalytic converter.
7. How do I fix the P013F code on a 2014 GMC Sierra?
Repairs may include replacing the downstream oxygen sensor, fixing exhaust leaks, or repairing the catalytic converter if damaged.
8. How much does it cost to fix a P013F code on a 2014 GMC Sierra?
The cost varies depending on the issue, but replacing the oxygen sensor typically costs $150-$300, including parts and labor.
9. Can a faulty catalytic converter cause the P013F code?
Yes, a damaged or inefficient catalytic converter can affect the oxygen sensor's readings and trigger this code.
10. Will clearing the P013F code solve the problem on my 2014 GMC Sierra?
Clearing the code will temporarily remove it, but if the root cause isn't fixed, the code will likely return.
Discuss the causes and fixes for P013F 2014 GMC Sierra OBDII Code
Code P013F 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
