P013E Ford Code - Oxygen Sensor Delayed Response Rich to Lean Bank 1 Sensor 2
Quick Answer
During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013E Ford indicates Oxygen Sensor Delayed Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013E Ford Description
What are the Possible Causes of the DTC P013E Ford?
- Faulty Heated Oxygen Bank 1 Sensor 2
- Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Exhaust leaks before or near the Heated Oxygen Bank 1 Sensor 2
How to Fix the DTC P013E Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013E Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013E Ford code?
Need more information on how to fix the P013E Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013E Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013E Ford Code
1. What are the common symptoms of OBDII code P013E in a Ford vehicle?
- Common symptoms include reduced fuel efficiency, rough idling, and the illumination of the check engine light.
2. What can cause the OBDII code P013E in a Ford, indicating an Oxygen Sensor Delayed Response Rich to Lean Bank 1 Sensor 2?
- Possible causes include a faulty oxygen sensor, issues with the fuel system, vacuum leaks, or wiring problems.
3. How can I diagnose the OBDII code P013E on my Ford vehicle?
- Diagnosing P013E typically involves using an OBDII scanner to read the code, checking the oxygen sensor and related components for any visible damage, and performing a thorough inspection of the fuel system.
4. Can driving with the OBDII code P013E present cause further damage to my Ford vehicle?
- While driving with this code may not immediately harm your vehicle, it can lead to decreased fuel efficiency and potential long-term damage to the engine or catalytic converter if left unresolved.
5. What are some repair tips for addressing the OBDII code P013E in a Ford?
- Repair tips include replacing the oxygen sensor, checking and repairing any damaged wiring, ensuring proper fuel system operation, and addressing any vacuum leaks.
6. How important is it to address the OBDII code P013E promptly in my Ford vehicle?
- It is recommended to address this code promptly to prevent further damage to the engine, ensure optimal fuel efficiency, and maintain overall vehicle performance.
7. Can I reset the check engine light after addressing the OBDII code P013E in my Ford?
- Yes, after repairing the issue causing the code, you can reset the check engine light using an OBDII scanner to clear the code and turn off the warning light.
8. Is it possible for a DIY enthusiast to fix the OBDII code P013E issue in a Ford at home?
- Depending on your mechanical skills and access to tools, DIY enthusiasts may be able to address this code by replacing the oxygen sensor or checking for common issues like wiring faults.
9. How much does it typically cost to repair the OBDII code P013E in a Ford at a professional auto repair shop?
- The cost of repairing P013E can vary depending on the exact cause of the issue, but it may range from $200 to $500 at a professional auto repair shop.
10. Will fixing the OBDII code P013E improve the overall performance of my Ford vehicle?
- Yes, addressing this code can lead to improved fuel efficiency, smoother engine operation, and overall better performance of your Ford vehicle.
Discuss the causes and fixes for P013E Ford OBDII Code
Code P013E Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
