P013D Mercury Code - Oxygen Sensor Slow Response Lean to Rich Bank 2 Sensor 2
Quick Answer
During a Deceleration Fuel Shut-Off (DFSO) event, the Powertrain Control Module (PCM) monitors the rear heated oxygen sensor (HO2S) signal to determine if the signal is stuck in range. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013D Mercury indicates Oxygen Sensor Slow Response Lean to Rich Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013D Mercury Description
What are the Possible Causes of the DTC P013D Mercury?
- Faulty Heated Oxygen Bank 1 Sensor 2
- Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Exhaust leaks before or near the Heated Oxygen Bank 1 Sensor 2
How to Fix the DTC P013D Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013D Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013D Mercury code?
Need more information on how to fix the P013D Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013D Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013D Mercury Code
1. What are the common symptoms of OBDII code P013D in a Mercury vehicle?
- Common symptoms include decreased fuel efficiency, rough idling, engine hesitation, and potential stalling.
2. What does the OBDII code P013D Mercury indicate?
- The code P013D indicates a slow response from the oxygen sensor located on bank 2, sensor 2, signaling a lean to rich condition.
3. What are the possible causes of OBDII code P013D in a Mercury?
- Potential causes include a faulty oxygen sensor, vacuum leaks, exhaust system issues, fuel system problems, or a malfunctioning engine control module (ECM).
4. How do I diagnose the OBDII code P013D in my Mercury?
- Diagnosis typically involves using an OBDII scanner to retrieve the code, checking the oxygen sensor's wiring and connections, inspecting for exhaust leaks, and performing a voltage test on the sensor.
5. Can I continue driving my Mercury with the OBDII code P013D present?
- It is not recommended to continue driving with the code present, as it can lead to poor engine performance and potential damage to the catalytic converter.
6. How can I repair OBDII code P013D in my Mercury?
- Repair options may include replacing the oxygen sensor, fixing any vacuum leaks, addressing exhaust system issues, ensuring proper fuel delivery, or reprogramming the ECM.
7. Is it possible to reset the OBDII code P013D in a Mercury without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is important to address the root cause to prevent the code from reoccurring.
8. Will OBDII code P013D cause my Mercury to fail an emissions test?
- Yes, the code P013D can cause your Mercury to fail an emissions test due to the impact on the air-fuel mixture and emissions levels.
9. How long does it typically take to repair OBDII code P013D in a Mercury?
- The repair time can vary depending on the specific cause of the code, but it may take anywhere from 1-3 hours to diagnose and fix the issue.
10. Can I prevent OBDII code P013D from appearing in my Mercury?
- Regular maintenance, such as timely oxygen sensor replacements, checking for exhaust leaks, and addressing engine issues promptly, can help prevent the recurrence of code P013D.
Discuss the causes and fixes for P013D Mercury OBDII Code
Code P013D Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
