P013D 2014 GMC Sierra Code - HO2S Slow Response Lean to Rich Bank 2 Sensor 2
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P013D 2014 GMC Sierra indicates HO2S Slow Response Lean to Rich Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Bank 2 Sensor 2, Heated Oxygen Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P013D 2014 GMC Sierra Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the accumulated mass airflow monitored during lean-to-rich transitions between 350 - 650 mV is greater than calibrated value.
What are the Possible Causes of the DTC P013D 2014 GMC Sierra?
- Faulty Heated Oxygen Bank 2 Sensor 2
- Heated Oxygen Bank 2 Sensor 2 harness is open or shorted
- Heated Oxygen Bank 2 Sensor 2 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P013D 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013D 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013D 2014 GMC Sierra code?
Need more information on how to fix the P013D 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013D 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013D 2014 GMC Sierra Code
What does the OBDII code P013D mean for a 2014 GMC Sierra?
P013D indicates a slow response time of the downstream oxygen sensor (Bank 2, Sensor 2) when switching from a lean to a rich condition, suggesting it may not be functioning properly.
What are the symptoms of the P013D code in a 2014 GMC Sierra?
Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, or no noticeable symptoms at all in some cases.
What causes the P013D code to appear?
Common causes include a failing downstream oxygen sensor, exhaust leaks, damaged wiring or connectors, or issues with the vehicle's PCM (Powertrain Control Module).
How can I diagnose the P013D code on my GMC Sierra?
Use a scan tool to confirm the code, visually inspect the oxygen sensor and wiring for damage, and check for exhaust leaks or other related issues near Bank 2.
Can I drive my 2014 GMC Sierra with the P013D code?
While the vehicle may still be drivable, it's not recommended to ignore the code as it can lead to reduced efficiency and potential long-term damage to the catalytic converter.
How do I fix the P013D code on a 2014 GMC Sierra?
Repairs typically involve replacing the downstream oxygen sensor for Bank 2, repairing any wiring issues, or fixing exhaust leaks if present.
How much does it cost to repair the P013D code?
Replacing an oxygen sensor typically costs between $150 and $300, depending on parts and labor rates. Additional repairs like fixing exhaust leaks may increase the cost.
Can a dirty air filter or fuel injector cause the P013D code?
While unlikely, issues with air or fuel delivery could potentially contribute to sensor response problems, so it’s worth inspecting these components.
How can I prevent the P013D code from recurring?
Regular maintenance, such as inspecting and replacing oxygen sensors as needed, checking for exhaust leaks, and addressing wiring issues promptly, can help prevent this code.
Does the P013D code affect emissions testing?
Yes, this code can cause your vehicle to fail an emissions test since it indicates a potential issue with the oxygen sensor or exhaust system.
Discuss the causes and fixes for P013D 2014 GMC Sierra OBDII Code
Code P013D 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
