AutoCodesChevrolet – P013B 2015 Chevrolet Silverado

P013B 2015 Chevrolet Silverado Code - HO2S Slow Response Lean to Rich Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P013B 2015 Chevrolet Silverado indicates HO2S Slow Response Lean to Rich Bank 1 Sensor 2.
Common causes
Common causes include Faulty Heated Oxygen Bank 1 Sensor 2, Heated Oxygen Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 381
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 28, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P013B 2015 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the accumulated mass airflow monitored during lean-to-rich transitions between 350 - 650 mV is greater than calibrated value.
OBDII Code P013B 2015 Chevrolet Silverado - HO2S Slow Response Lean to Rich Bank 1 Sensor 2 - AutoCodes.com
P013B 2015 Chevrolet Silverado Code - HO2S Slow Response Lean to Rich Bank 1 Sensor 2

What are the Possible Causes of the DTC P013B 2015 Chevrolet Silverado?

  • Faulty Heated Oxygen Bank 1 Sensor 2
  • Heated Oxygen Bank 1 Sensor 2 harness is open or shorted
  • Heated Oxygen Bank 1 Sensor 2 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P013B 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P013B 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P013B 2015 Chevrolet Silverado code?

Need more information on how to fix the P013B 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P013B 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P013B 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P013B in a 2015 Chevrolet Silverado?

- Common symptoms include poor fuel efficiency, rough idling, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P013B "HO2S Slow Response Lean to Rich Bank 1 Sensor 2" mean in a 2015 Chevrolet Silverado?

- This code indicates that the downstream oxygen sensor in bank 1 is not responding quickly enough to changes in the air-fuel mixture, shifting from a lean to a rich condition too slowly.

3. What are the possible causes of OBDII code P013B in a 2015 Chevrolet Silverado?

- Potential causes include a faulty oxygen sensor, wiring issues, exhaust leaks, vacuum leaks, fuel pressure problems, or a malfunctioning engine control module.

4. How can I diagnose the OBDII code P013B in my 2015 Chevrolet Silverado?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, checking the oxygen sensor's wiring and connections, inspecting for exhaust leaks, and testing the sensor's response using a multimeter.

5. What are the repair options for addressing OBDII code P013B in a 2015 Chevrolet Silverado?

- Repair options may include replacing the downstream oxygen sensor, repairing or replacing damaged wiring, fixing exhaust leaks, addressing vacuum leaks, checking and adjusting fuel pressure, or reprogramming the engine control module.

6. Can I continue driving my 2015 Chevrolet Silverado with OBDII code P013B?

- While your vehicle may still be operable with this code, it is recommended to address the issue promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

7. How much does it typically cost to repair OBDII code P013B in a 2015 Chevrolet Silverado?

- The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $500 or more, including parts and labor.

8. Will resetting the check engine light make OBDII code P013B disappear in a 2015 Chevrolet Silverado?

- Resetting the check engine light may temporarily turn it off, but if the underlying issue causing code P013B is not addressed, the light will likely illuminate again once the problem is detected by the vehicle's onboard diagnostics.

9. How often should I replace oxygen sensors in a 2015 Chevrolet Silverado to prevent OBDII code P013B?

- Oxygen sensors generally have a lifespan of around 60,000 to 100,000 miles, so it's recommended to replace them within this mileage range to maintain optimal engine performance and prevent issues like code P013B.

10. Can a DIY enthusiast fix OBDII code P013B in a 2015 Chevrolet Silverado, or is it best left to professionals?

- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address code P013B themselves by following repair guides and procedures. However, if you're unsure or unfamiliar with automotive repairs, it's best to consult a professional mechanic for accurate diagnosis and repair.

Discuss the causes and fixes for P013B 2015 Chevrolet Silverado OBDII Code

Code P013B 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play