P013A Scion Code - Oxygen Sensor Slow Response Rich to Lean Bank 1 Sensor 2
Quick Answer
In order to obtain a high purification rate of the Carbon Monoxide (CO), Hydrocarbon (HC), and Nitrogen Oxide (NOx) components in the exhaust gas, a Three-Way Catalytic Converter (TWC) is used. Common causes include Faulty Oxygen Sensor Bank 1 Sensor 2, Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted, Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P013A Scion indicates Oxygen Sensor Slow Response Rich to Lean Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty Oxygen Sensor Bank 1 Sensor 2, Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted, Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P013A Scion Description
The heated oxygen sensor is located behind the TWC and detects the oxygen concentration in the exhaust gas. Since the sensor is integrated with the heater that heats the sensing portion, it is possible to detect the oxygen concentration even when the intake air volume is low (the exhaust gas temperature is low).
When the air-fuel ratio becomes lean, the oxygen concentration in the exhaust gas is high. The heated oxygen sensor informs the ECM that the post-TWC air-fuel ratio is lean (low voltage, i.e. less than 0.45 V).
Conversely, when the air-fuel ratio is richer than the stoichiometric air-fuel level, the oxygen concentration in the exhaust gas is low. The heated oxygen sensor informs the ECM that the post-TWC air-fuel ratio is rich (high voltage, i.e. more than 0.45 V). The heated oxygen sensor has the property of changing its output voltage drastically when the air-fuel ratio is close to the stoichiometric level.
The ECM uses the supplementary information from the heated oxygen sensor to determine whether the air-fuel ratio after the TWC is rich or lean and adjusts the fuel injection duration accordingly. Thus, if the heated oxygen sensor is working improperly due to internal malfunctions, the ECM is unable to compensate for deviations in the primary air-fuel ratio control.
The ECM continuously monitors the heated oxygen sensor output voltage while the engine is running. If the sensor output voltage does not drop from 0.35 to 0.2 V immediately when the vehicle decelerates and the fuel cut is operating, the ECM illuminates the MIL and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P013A Scion?
- Faulty Oxygen Sensor Bank 1 Sensor 2
- Oxygen Sensor Bank 1 Sensor 2 harness is open or shorted
- Oxygen Sensor Bank 1 Sensor 2 circuit poor electrical connection
- Gas leak from exhaust system
How to Fix the DTC P013A Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P013A Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P013A Scion code?
Need more information on how to fix the P013A Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P013A Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P013A Scion Code
What does the OBDII code P013A mean for a Scion?
P013A indicates that the oxygen sensor (Bank 1, Sensor 2) is detecting a slow response when switching from a rich to lean mixture.
What are the common symptoms of code P013A in a Scion?
Symptoms may include the check engine light turning on, reduced fuel efficiency, and potential rough idling or hesitation during acceleration.
What causes a P013A code in a Scion?
Common causes include a faulty oxygen sensor (Bank 1, Sensor 2), exhaust leaks, wiring issues, or a malfunctioning catalytic converter.
Can a bad oxygen sensor cause a P013A code?
Yes, a faulty oxygen sensor is one of the most common causes of a P013A code.
How do I diagnose the P013A code on my Scion?
Diagnosis may involve using a scan tool to monitor oxygen sensor readings, visually inspecting wiring and connectors, and checking for exhaust leaks.
Can I drive my Scion with a P013A code?
While driving with this code is possible, it may lead to reduced fuel efficiency and potential damage to other components if not addressed promptly.
How do I fix the P013A code on a Scion?
Common fixes include replacing the oxygen sensor, repairing wiring or connector issues, sealing exhaust leaks, or addressing a faulty catalytic converter.
How much does it cost to fix a P013A code?
The cost varies depending on the issue. Replacing an oxygen sensor typically costs $100–$300, while repairing exhaust leaks or catalytic converter issues can be more expensive.
Can a dirty air filter cause a P013A code?
A dirty air filter is unlikely to directly cause this code, but it can contribute to poor engine performance, which might exacerbate related issues.
Does the P013A code affect emissions?
Yes, a P013A code can lead to increased emissions due to improper air-fuel mixture readings, potentially causing your vehicle to fail an emissions test.
Discuss the causes and fixes for P013A Scion OBDII Code
Code P013A Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
