AutoCodesChevrolet – P0137 2016 Chevrolet Silverado

P0137 2016 Chevrolet Silverado Code - HO2S Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0137 2016 Chevrolet Silverado indicates HO2S Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 448
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 26, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0137 2016 Chevrolet Silverado Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the heated oxygen sensor is shorted to ground if the HO2S voltage is less than 50 mV.
OBDII Code P0137 2016 Chevrolet Silverado - HO2S Circuit Low Voltage Bank 1 Sensor 2 - AutoCodes.com
P0137 2016 Chevrolet Silverado Code - HO2S Circuit Low Voltage Bank 1 Sensor 2

What are the Possible Causes of the DTC P0137 2016 Chevrolet Silverado?

  • Faulty Rear Heated Oxygen Sensor Bank 1
  • Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P0137 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0137 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0137 2016 Chevrolet Silverado code?

Need more information on how to fix the P0137 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0137 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0137 2016 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P0137 in a 2016 Chevrolet Silverado?

- Common symptoms include poor fuel economy, rough idling, hesitation during acceleration, and the illumination of the Check Engine Light.

2. What does the HO2S Circuit Low Voltage Bank 1 Sensor 2 error code mean on a 2016 Chevrolet Silverado?

- This code (P0137) indicates that the oxygen sensor (O2 sensor) located after the catalytic converter in bank 1 is providing a low voltage signal.

3. What are the possible causes of OBDII code P0137 in a 2016 Chevrolet Silverado?

- The main causes include a faulty oxygen sensor (Bank 1 Sensor 2), wiring issues in the oxygen sensor circuit, exhaust leaks, or a malfunctioning catalytic converter.

4. How can I diagnose the OBDII code P0137 in my 2016 Chevrolet Silverado?

- Diagnosis involves using an OBDII scanner to read the code, inspecting the wiring connected to the oxygen sensor, checking for exhaust leaks, and testing the sensor's voltage output.

5. What are the repair options for fixing the HO2S Circuit Low Voltage Bank 1 Sensor 2 code on a 2016 Chevrolet Silverado?

- Possible repairs include replacing the oxygen sensor in bank 1 sensor 2, repairing any damaged wiring, fixing exhaust leaks, or replacing the catalytic converter if necessary.

6. Can I continue driving my 2016 Chevrolet Silverado with the P0137 code present?

- It is not recommended to drive with the P0137 code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.

7. How much does it typically cost to repair OBDII code P0137 in a 2016 Chevrolet Silverado?

- The cost can vary depending on the exact cause of the issue, but typically, replacing the oxygen sensor can range from $100 to $300, while fixing wiring or exhaust leaks may cost more.

8. Is it possible to reset the Check Engine Light after resolving the P0137 code on a 2016 Chevrolet Silverado?

- Yes, the Check Engine Light can be reset using an OBDII scanner after the issue causing the P0137 code has been fixed.

9. How often should the oxygen sensors be replaced in a 2016 Chevrolet Silverado to prevent OBDII codes like P0137?

- Oxygen sensors typically last around 100,000 miles, but it's recommended to follow the manufacturer's maintenance schedule and replace them as needed to avoid potential issues.

10. Are there any DIY tips for troubleshooting and fixing the HO2S Circuit Low Voltage Bank 1 Sensor 2 code in a 2016 Chevrolet Silverado?

- DIY tips include checking for loose or damaged wiring, inspecting the oxygen sensor visually for any signs of damage, and ensuring a proper connection before considering replacing any components.

Discuss the causes and fixes for P0137 2016 Chevrolet Silverado OBDII Code

Code P0137 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play