AutoCodes – Nissan – P0137 2013 Nissan Rogue

P0137 2013 Nissan Rogue Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0137 2013 Nissan Rogue indicates Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,225
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 14, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0137 2013 Nissan Rogue Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
OBDII Code P0137 2013 Nissan Rogue - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2 - AutoCodes.com
P0137 2013 Nissan Rogue Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

What are the Possible Causes of the DTC P0137 2013 Nissan Rogue?

  • Faulty Rear Heated Oxygen Sensor Bank 1
  • Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
  • Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks may be faulty
  • Exhaust gas leaks

How to Fix the DTC P0137 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0137 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0137 2013 Nissan Rogue code?

Need more information on how to fix the P0137 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0137 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0137 2013 Nissan Rogue Code

1. What does the OBDII code P0137 mean for a 2013 Nissan Rogue?

This code indicates a low voltage condition in the heated oxygen sensor (HO2S) circuit of Bank 1 Sensor 2 in the exhaust system.

2. What are the common symptoms of a P0137 code in a 2013 Nissan Rogue?

Common symptoms include poor fuel economy, rough idling, engine misfires, failed emissions test, and the illumination of the check engine light.

3. What are the possible causes of a P0137 code in a 2013 Nissan Rogue?

Potential causes include a faulty heated oxygen sensor (Bank 1 Sensor 2), wiring or connector issues in the sensor circuit, exhaust leaks, or an engine mechanical problem.

4. How can I diagnose a P0137 code in my 2013 Nissan Rogue?

Diagnosis typically involves using an OBDII scanner to read the code, performing visual inspections of the sensor and its wiring, checking for exhaust leaks, and testing the sensor's voltage output.

5. Can I continue driving my 2013 Nissan Rogue with a P0137 code?

While the vehicle may still be operable with this code, it is recommended to address the issue promptly to prevent potential damage to the catalytic converter and ensure optimal engine performance.

6. How can I repair a P0137 code in my 2013 Nissan Rogue?

Repair options may include replacing the Bank 1 Sensor 2 oxygen sensor, repairing or replacing damaged wiring or connectors, fixing exhaust leaks, or addressing any underlying engine issues.

7. Will resetting the check engine light resolve a P0137 code in a 2013 Nissan Rogue?

Simply resetting the check engine light without addressing the root cause of the P0137 code will not solve the underlying issue. It is crucial to diagnose and repair the problem to prevent it from reoccurring.

8. Are there any DIY tips for addressing a P0137 code in a 2013 Nissan Rogue?

While some may attempt to replace the oxygen sensor themselves, it is recommended to have a professional diagnose and repair the issue to ensure it is resolved correctly.

9. How much does it typically cost to fix a P0137 code in a 2013 Nissan Rogue?

The cost of repair can vary depending on the cause of the code and whether you choose to address it yourself or seek professional assistance. Costs may include parts, labor, and diagnostic fees.

10. How often does a P0137 code occur in a 2013 Nissan Rogue?

The frequency of a P0137 code can vary, but it is not uncommon in vehicles with higher mileage or those exposed to harsh driving conditions. Regular maintenance and timely repairs can help prevent such issues.

Discuss the causes and fixes for P0137 2013 Nissan Rogue OBDII Code

Code P0137 2013 Nissan Rogue comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play