AutoCodes – Generic – P0136

P0136 Code - Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensor 2 (HO2S2) (Downstream), after the three-way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Exhaust gas leaks, Faulty Heated Oxygen Sensor 2 (HO2S2) (Downstream) Bank 1, Heated Oxygen Sensor 2 Bank 1 harness is open or shorted. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0136 indicates Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2.
Common causes
Common causes include Exhaust gas leaks, Faulty Heated Oxygen Sensor 2 (HO2S2) (Downstream) Bank 1, Heated Oxygen Sensor 2 Bank 1 harness is open or shorted.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 113,816
How popular is this code, among other codes? Medium
Table of contents Created and updated by William Orellana on Jul 24, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0136 Description

The Heated Oxygen Sensor 2 (HO2S2) (Downstream), after the three-way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air-fuel mixture (air-fuel ratio) must maintain near the ideal stoichiometric ratio. The HO2S2 output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Powertrain Control Module (PCM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S2 generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The PCM interprets Lean when the HO2S2 voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The PCM interprets Rich when the HO2S2 voltage is above 0.45 V. The P0136 code will set when the PCM detects that the HO2S2 signal voltage is out of range for an extended period.
OBDII Code P0136 - Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2 - AutoCodes.com
P0136 Code - Heated Oxygen Sensor Circuit Malfunction Bank 1 Sensor 2

What are the Possible Causes of the DTC P0136?

  • Exhaust gas leaks
  • Faulty Heated Oxygen Sensor 2 (HO2S2) (Downstream) Bank 1
  • Heated Oxygen Sensor 2 Bank 1 harness is open or shorted
  • Heated Oxygen Sensor 2 Bank 1 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors

How to Fix the DTC P0136?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0136 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0136 code?

Need more information on how to fix the P0136 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0136 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0136 Code

1. What are common symptoms of OBDII code P0136?

- Common symptoms include poor fuel efficiency, rough idling, and the illumination of the Check Engine light.

2. What does OBDII code P0136 indicate?

- OBDII code P0136 indicates a malfunction in the heated oxygen sensor circuit for Bank 1 Sensor 2 in the vehicle's exhaust system.

3. What are possible causes of OBDII code P0136?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the vehicle's engine control module.

4. How can I diagnose the cause of OBDII code P0136?

- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and testing the sensor's voltage.

5. Can I drive with OBDII code P0136?

- It is not recommended to drive for an extended period with this code as it can negatively impact the vehicle's performance and fuel efficiency.

6. How can I repair OBDII code P0136?

- Repair options may include replacing the oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming the engine control module.

7. How much does it cost to fix OBDII code P0136?

- The cost of repairs can vary depending on the underlying cause, but it may range from $100 to $500 or more, including parts and labor.

8. Can I reset OBDII code P0136 without fixing the issue?

- While you can clear the code temporarily, it is important to address the root cause to prevent further issues and potential damage to the vehicle.

9. How long does it take to fix OBDII code P0136?

- The repair time can vary based on the specific cause and complexity of the issue, but it may take anywhere from 30 minutes to a few hours.

10. Will OBDII code P0136 cause a vehicle to fail an emissions test?

- Yes, OBDII code P0136 typically indicates an emissions-related issue, which may cause the vehicle to fail an emissions test until the problem is resolved.

Discuss the causes and fixes for P0136 OBDII Code

Code P0136 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play