AutoCodes – Volvo – P0133 Volvo

P0133 Volvo Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 1

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1, Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0133 Volvo indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 1.
Common causes
Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1, Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 658
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 30, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0133 Volvo Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the Engine Control Module (ECM) operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0 - 1, 000 mV. Once sufficient HO2S voltage fluctuation is observed by the ECM, Closed Loop is entered. The ECM uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases toward 1, 000 mV indicates a rich fuel mixture. An HO2S voltage that decreases toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the HO2S 1 rich-to-lean or lean-to-rich average response time is greater than a calibrated value for greater than 60s.
OBDII Code P0133 Volvo - O2 Sensor Circuit Slow Response Bank 1 Sensor 1 - AutoCodes.com
P0133 Volvo Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 1

What are the Possible Causes of the DTC P0133 Volvo?

  • Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
  • Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted
  • Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection
  • Low or high fuel system pressure
  • Fuel contamination
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Engine vacuum leaks

How to Fix the DTC P0133 Volvo?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0133 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0133 Volvo code?

Need more information on how to fix the P0133 Volvo code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0133 Volvo code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0133 Volvo Code

1. What are the common symptoms of OBDII code P0133 in a Volvo?

- Common symptoms include poor fuel economy, rough idle, engine hesitation, and a noticeable decrease in engine performance.

2. What does the O2 Sensor Circuit Slow Response Bank 1 Sensor 1 code mean in a Volvo?

- This code indicates that the oxygen sensor located in the exhaust system before the catalytic converter is responding slowly.

3. What are the possible causes of OBDII code P0133 in a Volvo?

- The main causes of this code include a faulty oxygen sensor, issues with the wiring or connections related to the sensor, or a vacuum leak in the intake system.

4. How can I diagnose the O2 sensor circuit slow response issue in my Volvo?

- You can use a scan tool to monitor the oxygen sensor's response time, inspect the sensor wiring for damage, and check for any exhaust leaks that could be affecting sensor performance.

5. Can driving with an unresolved P0133 code cause further damage to my Volvo?

- Continuing to drive with this code may lead to decreased fuel efficiency, potential damage to the catalytic converter, and increased emissions output.

6. Is it safe to replace the O2 sensor in my Volvo myself to fix code P0133?

- While it is possible to replace the sensor yourself, it is recommended to have a professional mechanic diagnose the issue to ensure proper installation and avoid potential complications.

7. What are some tips for repairing OBDII code P0133 in a Volvo?

- Inspect the sensor and wiring for any visible damage, clean any debris around the sensor, clear the code with a scan tool after making repairs, and monitor the sensor's performance.

8. How much does it typically cost to fix the O2 sensor circuit slow response issue in a Volvo?

- The cost of repairing this issue can vary depending on the cause of the problem, but it typically ranges from $100 to $300 for parts and labor.

9. Are there any DIY methods to troubleshoot and potentially resolve OBDII code P0133 in a Volvo?

- You can visually inspect the sensor and wiring for any obvious issues, clean the sensor with specialized cleaner, and reset the code to see if the problem reoccurs.

10. How important is it to address OBDII code P0133 promptly in a Volvo?

- It is important to address this code promptly as it can affect your Volvo's performance, fuel efficiency, and emissions output, and may lead to more serious issues if left unresolved.

Discuss the causes and fixes for P0133 Volvo OBDII Code

Code P0133 Volvo comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play