P0133 2008 Honda Accord Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 1
Quick Answer
The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0133 2008 Honda Accord indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0133 2008 Honda Accord Description
What are the Possible Causes of the DTC P0133 2008 Honda Accord?
- Faulty Front Heated Oxygen Sensor Bank 1
- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0133 2008 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0133 2008 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0133 2008 Honda Accord code?
Need more information on how to fix the P0133 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0133 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0133 2008 Honda Accord Code
1. What does the OBDII code P0133 mean on a 2008 Honda Accord?
This code indicates that the oxygen sensor in bank 1, sensor 1 is responding slower than normal to changes in air-fuel mixture, potentially affecting the engine's performance.
2. What are common symptoms of code P0133 in a 2008 Honda Accord?
Symptoms may include poor fuel economy, rough engine idle, engine hesitation during acceleration, and the Check Engine Light turning on.
3. What causes code P0133 to appear on a 2008 Honda Accord?
Potential causes include a faulty oxygen sensor, exhaust leaks near the sensor, problems with the wiring or connectors for the sensor, or issues with the fuel delivery system.
4. How can I fix the OBDII code P0133 on my 2008 Honda Accord?
To fix this issue, you might need to replace the oxygen sensor, repair any exhaust leaks, fix wiring issues, or address problems with the fuel system components.
5. Is it safe to drive my 2008 Honda Accord with code P0133?
While you can typically still drive the vehicle, it's best to address the issue soon to avoid potential engine damage or decreased fuel efficiency.
6. How do I verify that the oxygen sensor is the problem when diagnosing code P0133?
You can check the sensor's performance with an OBDII scanner that displays live data, checking for slow response times compared to specifications. Inspecting the sensor and wiring visually for damage is also recommended.
7. Can a dirty air filter cause code P0133 in a 2008 Honda Accord?
While a dirty air filter itself might not trigger this code directly, it can affect overall engine performance, which might contribute to conditions causing the sensor to respond slowly.
8. What is the cost to replace an oxygen sensor for a 2008 Honda Accord?
The cost for an oxygen sensor replacement can range from $200 to $400, depending on the labor rates in your area and the cost of the parts.
9. How long does it take to replace the oxygen sensor on a 2008 Honda Accord?
Typically, replacing an oxygen sensor can take about 1 to 2 hours, depending on the tool availability and the location of the sensor in the vehicle.
10. After replacing the oxygen sensor, will code P0133 clear automatically on my 2008 Honda Accord?
The code might not clear immediately; a few drive cycles may be needed for the vehicle's computer to recheck the system. Alternatively, you can use an OBDII scanner to manually clear the code after the repair.
Discuss the causes and fixes for P0133 2008 Honda Accord OBDII Code
Code P0133 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
