P0133 2006 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 1
Quick Answer
The powertrain control module(PCM) commands an air/fuel ratio that changes in the shape of a square wave. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0133 2006 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0133 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0133 2006 Ford Fusion?
- Faulty Front Heated Oxygen Sensor Bank 1
- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0133 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0133 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0133 2006 Ford Fusion code?
Need more information on how to fix the P0133 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0133 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0133 2006 Ford Fusion Code
1. What does OBDII code P0133 mean on a 2006 Ford Fusion?
P0133 indicates that the oxygen sensor (Bank 1, Sensor 1) has a slow response time, meaning it is not switching between rich and lean efficiently as expected by the engine control module (ECM).
2. What are the symptoms of code P0133 on a 2006 Ford Fusion?
Common symptoms include reduced fuel efficiency, rough idling, hesitation during acceleration, and the check engine light illuminated.
3. What is Bank 1, Sensor 1 on a 2006 Ford Fusion?
Bank 1 refers to the side of the engine with cylinder 1, and Sensor 1 is the upstream oxygen sensor located before the catalytic converter.
4. What causes code P0133 to appear on a 2006 Ford Fusion?
Common causes include a failing oxygen sensor, exhaust leaks, a dirty or clogged air filter, wiring issues, or a problem with the engine's air-fuel mixture.
5. Can a dirty air filter cause code P0133 on a 2006 Ford Fusion?
Yes, a dirty or clogged air filter can affect the air-fuel mixture and lead to a slow oxygen sensor response, triggering code P0133.
6. How do I fix code P0133 on a 2006 Ford Fusion?
Repairs may involve replacing the upstream oxygen sensor, repairing exhaust leaks, inspecting and fixing damaged wiring, or cleaning/replacing the air filter.
7. Is it safe to drive a 2006 Ford Fusion with code P0133?
While the car may still be drivable, ignoring P0133 can lead to reduced performance, poor fuel economy, and potential damage to the catalytic converter over time.
8. How much does it cost to fix code P0133 on a 2006 Ford Fusion?
Replacing the oxygen sensor typically costs between $150 and $300, including parts and labor. Additional repairs (e.g., fixing exhaust leaks) may increase costs.
9. Can a bad oxygen sensor damage my 2006 Ford Fusion’s engine?
A faulty oxygen sensor can lead to improper air-fuel mixture, which over time may cause damage to the catalytic converter and affect engine performance.
10. How can I prevent code P0133 from occurring on my 2006 Ford Fusion?
Regular maintenance, such as replacing the air filter, inspecting the exhaust system, and ensuring oxygen sensors are in good condition, can help prevent this code.
Discuss the causes and fixes for P0133 2006 Ford Fusion OBDII Code
Code P0133 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
