P0132 Mitsubishi Code - Cylinder 1-4 Heated Oxygen Front Sensor Circuit High Voltage
Quick Answer
The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0132 Mitsubishi indicates Cylinder 1-4 Heated Oxygen Front Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0132 Mitsubishi Description
What are the Possible Causes of the DTC P0132 Mitsubishi?
- Faulty Front Heated Oxygen Sensor Bank 1
- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0132 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0132 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0132 Mitsubishi code?
Need more information on how to fix the P0132 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0132 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0132 Mitsubishi Code
What does OBDII code P0132 mean for a Mitsubishi?
Code P0132 indicates that the heated oxygen sensor (HO2S) in the front circuit for cylinder 1-4 has detected a high voltage signal, suggesting a rich air-fuel mixture.
What are the symptoms of code P0132 in a Mitsubishi?
Common symptoms include poor fuel economy, rough engine performance, black exhaust smoke, and the illumination of the check engine light.
What causes code P0132 to appear in a Mitsubishi?
Potential causes include a faulty oxygen sensor, damaged wiring or connectors, a rich-running engine due to a malfunctioning fuel injector, or a defective mass airflow (MAF) sensor.
Can driving with code P0132 damage my Mitsubishi?
Driving with this code can lead to increased fuel consumption and emissions, and prolonged issues may cause damage to the catalytic converter.
How do I fix code P0132 in a Mitsubishi?
First, inspect the oxygen sensor's wiring and connectors for damage. Replace the oxygen sensor if it's faulty, and check for issues with the fuel system or MAF sensor.
How can I test the oxygen sensor for code P0132?
Use a multimeter or an OBDII scanner to measure the voltage output of the oxygen sensor. A consistently high voltage (above 1V) indicates a potential problem.
Can code P0132 be caused by a bad catalytic converter?
While rare, a clogged or damaged catalytic converter can indirectly contribute to a rich air-fuel mixture, leading to this code.
Does P0132 always mean the oxygen sensor is faulty?
No, other issues like fuel system problems, wiring damage, or sensor circuit malfunctions can trigger this code.
What tools do I need to diagnose code P0132 in a Mitsubishi?
You’ll need an OBDII scanner, a multimeter, and possibly a wiring diagram for your vehicle to perform diagnostics.
How much does it cost to fix code P0132 on a Mitsubishi?
Repair costs vary, but replacing an oxygen sensor typically ranges from $150 to $300, while fixing wiring or related issues may cost less depending on complexity.
Discuss the causes and fixes for P0132 Mitsubishi OBDII Code
Code P0132 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
